The product is intended for priming absorbent and porous substrates outside and inside the building. Particularly recommended for cement-lime plasters, aerated concrete, gypsum plasterboards and cement plasters.
Isoplast E is characterized by high penetration capacity, it is deeply absorbed into the ground, strengthening it, while allowing "breathing". These advantages improve the structure of substrates that have lost their proper parameters over time. It improves the adhesion to the surface of other materials that will be used on primed surfaces. By reducing the absorbency of the substrate, the consumption of applied material in emulsion coating paints, glue and mineral putty is reduced. Izoplast E, due to the content of biocide and fungicide, protects the primed substrate against the formation of mold fungus and bacterial growth in the product.

Technical data

• Coverage: depending on the absorbency of the substrate, approx. 0.05 to 0.2 L / m2
• 2-3 layers are made on the substrate with increased absorbency, not allowing the previous one to dry, more or less in a period of 3-4 hours, at a temperature of +5 to 25oC. Continued use of the surface is recommended after 24 hours.