Atlas - kalkių -cemento baltas TRB restauracinis tinkas
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
27.49EUR už paketas
reklaminė kaina
vieneto grynasis
24.52EUR už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
grynasis kainoraštis
27.49EUR
už 1.00 paketas
visos kainos
reklaminis tinklas
24.52EUR
už 1.00 paketas
kainoraščio kaina
bruto vienetas 33.81EUR
už paketas
reklaminė kaina
bruto vienetas
30.16EUR
už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
kainoraštis bruto
33.81EUR
už 1.00 paketas
visos kainos
reklaminė bruto
30.16EUR
už 1.00 paketas
Produkto aprašymas
Factory prepared, dry mix based on the highest quality mineral binders, an additional and modifier, as well as quartz and trass fillers.
Features
- contains light fillers
- resistance to water-soluble salts
- frost resistance
- water resistance
- homogeneous white color - does not require painting, can be the final layer
- very high degree of porosity - plaster has a high capacity to store crystallizing salts
- contains hydrophobic additives that reduce the surface absorbability of the plaster - the surface is protected against rainfall and water ingress from the outside
- suitable for manual or machine application
- thanks to a specially selected recipe, it perfectly cooperates with historical mortars used for erecting the object undergoing renovation
- meets the requirements of instructions 2-9-04
Application
- carrying out renovation works with a thickness of 10 to 25 mm on damp partitions, inside and outside the building in
- historic buildings and other objects for renovation of the damp and saline wall in
- on substrates with low or medium salinity in the system with the Atlas TRO renovation rendering
- on substrates with a high degree of salinity in a system with the Atlas TRO renovation rendering coat and a layer of Atlas TRP undercoat plaster
Technical data
- mixing ratio water / dry mix 4.5-4.75 l / 25 kg
- mortar preparation temperature, substrate and ambient temperature during work from +5 C to +30 C
- time of the mortar's readiness to work approx. 2 h
- water penetration ≤ 5 mm
- minimum layer thickness 10 mm
- maximum layer thickness 25 mm
- porosity> 40%
- air pore content in fresh mortar> 25%
- reaction to fire A1
- water absorption ≥ 0.3 kg / m 2 after 24 h
- water vapor permeability μ ≤ 15
- adhesion 0.3 N / mm - FP: B
- average consumption of about 12 kg of mortar per 1 m 2 , with a layer thickness of 10 mm
- meets the requirements of PN-EN 998-1: 2016
- package 25 kg
Techniniai duomenys - savybės
priedai