Bolix - klijai mineralinės vatos plokštėms Bolix WM
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
15.04EUR už paketas
reklaminė kaina
vieneto grynasis
14.81EUR už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
grynasis kainoraštis
15.04EUR
už 1.00 paketas
visos kainos
reklaminis tinklas
14.81EUR
už 1.00 paketas
kainoraščio kaina
bruto vienetas 18.49EUR
už paketas
reklaminė kaina
bruto vienetas
18.22EUR
už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
kainoraštis bruto
18.49EUR
už 1.00 paketas
visos kainos
reklaminė bruto
18.21EUR
už 1.00 paketas
Produkto aprašymas
It is used for gluing mineral wool boards to typical mineral substrates and making a layer reinforced with mineral wool reinforced with a fiberglass mesh. It is used to insulate the external walls of buildings in the technology of a seamless thermal insulation system based on mineral wool facade panels with a disturbed fiber system, parallel to the surface of the panel (laminar) and perpendicular (lamella wool).
Technical data
- Mixing proportions: 5.0-5.5 l of water per 25 kg of glue
- Open work time: approx. 1.5 hours
- Flow: <0.15 mm
- Adhesion
- adhesion to concrete:> 0.6MPa
- adhesion to mineral wool boards with disturbed fiber arrangement, parallel to the board surface (laminar):> 0.015 MPa
- adhesion to mineral wool boards with perpendicular fiber arrangement to the board surface (lamella wool):> 0.015 MPa
- Consistency: dry powder
- all technical specifications are given for a relative humidity of 60% and an air temperature of +20 ° C
- Adhesive mortar consumption on a properly prepared surface
- when insulating the building:
- when gluing mineral wool panels with a disturbed fiber system, parallel to the panel surface (laminar) is approx. 4.0 kg / m2
- when gluing mineral wool boards with perpendicular fiber arrangement to the board surface (lamella wool) is approx. 5.0 kg / m2.
- BOLIX WM glue is a dry mix of hydraulic binders, polymer, base of fine-grained mineral fillers and modifying additives.
Techniniai duomenys - savybės
- spalva:
- grey
- substrato temperatūra:
- 5 - 25 ° C
- taikymo temperatūros diapazonas:
- 5 - 25 ° C
- tūrinis tankis:
- 1,6 kg / dm³
priedai