Kategorijos

Botament-daugiafunkcinė greitai nustatoma reaktyvi izoliacija RD 2 The Green 1

gamintojas: Botament

kategorija: BOTAMENT - statybinė chemija, hidroizoliacija

Produkto Nr.: 31762

Užsakyto numerio kartotinis: 1 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
12.22EUR
kg
reklaminė kaina
vieneto grynasis
8.77EUR
kg
minimalus komercinis
produkto kiekis
8.00 kg
vienetas
prekyba
8.00 kg
visos kainos
grynasis kainoraštis
97.73EUR
8.00 kg
visos kainos
reklaminis tinklas
70.16EUR
8.00 kg
kainoraščio kaina
bruto vienetas
15.03EUR
kg
reklaminė kaina
bruto vienetas
10.79EUR
kg
minimalus komercinis
produkto kiekis
8.00 kg
vienetas
prekyba
8.00 kg
visos kainos
kainoraštis bruto
120.21EUR
8.00 kg
visos kainos
reklaminė bruto
86.30EUR
8.00 kg

Produkto aprašymas

RD 2 The Green 1 is a fast-setting sealing mortar that does not contain bitumen. It is a two-component product intended for insulation of parts of building and ground parts of buildings in contact with the ground, as well as for renovation of old insulation, but also for fixing protective and insulating panels . Does not require priming.

Technical data

  • plastic dispersion, cement, additives
  • green color
  • density ~ 1.18 kg / dm 3
  • coefficient S d : for a dry layer, 2.0 mm thick, about 2 m; for 2.5 mm approx. 2 m
  • compressive strength 3 N / mm 2
  • working time ~ 45 min
  • mixing ratio of the component in A: B - 1: 1
  • high flexibility
  • resistance to negative water pressure (under construction)
  • resistance to UV radiation, mr z, aging processes
  • does not contain bitumen and solvent in
  • maximum application thickness (wet): 5 mm without topping; with 20 mm sand topping
  • resistance to rain after about 3 hours
  • fixing protective and insulating panels after about 4 hours
  • mechanical load after about 24 hours
  • consumption from 0.5 to 4.0 kg / m 2 depending on the type of application
  • processing and substrate temperature from +5 C to +30 C

Note: The above data is available at 23 C and 50% relative humidity.

Application

  • moisture and waterproof insulation
  • insulation for ceramic cladding inside buildings
  • insulation of basement walls, foundation slabs and benches, terrace and balcony in
  • horizontal under-floor insulation, walls
  • isolation of the area in the water-laden gardens
  • insulation tank for water, liquid manure, silage
  • renovation of building insulation and old roofing
  • sealing vertical joints and working joints in water-permeable concrete
  • fixing protective and insulating panels
  • bridging fig

Application possible by spraying, filling, painting.