Kategorijos

Botament - MD 1 Greitas lankstus sandarinimo skiedinys

gamintojas: Botament

kategorija: BOTAMENT - statybinė chemija, hidroizoliacija

Produkto Nr.: 31853

Užsakyto numerio kartotinis: 1 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
7.34EUR
kg
reklaminė kaina
vieneto grynasis
5.27EUR
kg
minimalus komercinis
produkto kiekis
20.00 kg
vienetas
prekyba
20.00 kg
visos kainos
grynasis kainoraštis
146.75EUR
20.00 kg
visos kainos
reklaminis tinklas
105.38EUR
20.00 kg
kainoraščio kaina
bruto vienetas
9.02EUR
kg
reklaminė kaina
bruto vienetas
6.48EUR
kg
minimalus komercinis
produkto kiekis
20.00 kg
vienetas
prekyba
20.00 kg
visos kainos
kainoraštis bruto
180.50EUR
20.00 kg
visos kainos
reklaminė bruto
129.61EUR
20.00 kg

Produkto aprašymas

MD 1 Speed - it is a cement-polymer under-tile waterproofing, which can be used inside and outside the building. On balconies, terraces and rooms exposed to moisture. The mortar is flexible, has the ability to bridge scratches and high vapor permeability.

Technical data

  • material base - special cement with a combination of plastics
  • grey colour
  • 20 kg pack - bag
  • storage in a dry and cool place 9 months in its original closed packaging
  • temperature resistance from - 20 C to + 70 C
  • optimal amount of water ~ 25%
  • mixing ratio ~ 5.0 l / 20 kg
  • ripening time ~ 2 Minutes
  • working time ~ 30 Minutes
  • consumption per mm in dry condition - to carry out the required min. 2mm thick *
  • in dry condition ~ 1.2 kg / m ~ 2.4 kg / m
  • application time between layers ≥ 4 hours
  • application time between the last layer and ceramic laying ≥ 4 hours after full drying
  • processing and substrate temperature - + 5 C to + 30 C

Note: The above data is available at 23 C and 50% relative humidity.

Application

Sealing the following material in:

  • concrete, lightweight concrete and heavy concrete
  • full joint wall
  • cement and anhydrite screed
  • plasters of groups CS II, CS III and CS IV in accordance with PN EN 998 (compressive strength ≥ 1.5 N / mm)
  • gypsum plasters according to PN EN 13279 (compressive strength 2.0 N / mm)
  • old ceramic cladding
  • fiber cement boards
  • plasterboard
  • asphalt screed (IC 10)