Ceresit CD 24 is a fine-grained, one-component putty for leveling concrete and reinforced concrete surfaces as well as filling cavities and damaged areas. The range of application is up to 5 mm. It is suitable for closing pores and crevices, e.g. before applying a paint coat. Ceresit CD 24 can be used both on vertical and horizontal surfaces, inside and outside buildings. The mortar can be used on concrete class above C12 / 15.

Technical data:
- Base: cement with mineral fillers and high-quality, powdered resin,
- Grey colour,
- Grain size: 0 0.5 mm,
- Mixing ratio: approx. 5 l of water per 25 kg,
- Pre-ripening time: approx. 3 min,
- Wear time: approx. 50 min,
- Application temperature: from +5 C to +30 C,
- Applying the next layer: time between applying subsequent layers of CD 24 mortar: max. up to 3 hours, applying protective layers: after about 3 days,
- Shrinkage after 28 days: 0.12%,
- Temperature resistance after binding: from -50 C to +70 C,
- Rain resistance: after about 24 hours,
- Approximate consumption: approx. 1.5 kg / m2 / 1 mm thick,
- Packaging: 25 kg,
- Number on the pallet: 42 pieces,
- Wyb has technical approval of Instytut Techniki Budowlanej AT-15-7290 / 2007.

Attention:
Xi, Irritant. Irritating to eyes, respiratory system and skin. May cause sensitization by skin contact.