Ceresit CR 64 putty serves as a finishing coat for the renovation system. The properties of CR 64 make it possible to make thin-wall "cleanings" on walls and ceilings, completely covering uneven and rough surfaces of plaster in renovation, cement and cement-lime. The maximum thickness of the putty may be 5 mm and in this case it must be applied in two layers.

Technical data:
- base: a mixture of mineral binders with mineral fillers and modifiers,
- grey colour,
- bulk density: approx. 1.2 kg / dm3,
- mixing ratio: 6.25 6.75 l of water per 25 kg,
- application temperature: from +5 C to +25 C,
- consumption time: up to 2 hours,
- adhesion to the ground:> 0.3 MPa,
- approximate consumption: approx. 1.8 kg / m2 for each mm of thickness,
- packaging: 25kg,
- quantity on the pallet: 42 pieces,
- product has a hygienic assessment of the National Institute of Hygiene HK / B / 1259/03/2003 and technical approval of the Building Research Institute AT-15-6310 / 2004

Warning!
Xi, Irritant. Irritating to eyes, respiratory system and skin. Risk of serious damage to eyes. May cause sensitization by skin contact.