Initial, two-component fluid based on silicate and ester, used to make a horizontal diaphragm. This is to cut off capillary pull-up moisture. The product narrows the capillaries and has a hydrophobic effect. It can be used by low-pressure injection, also in walls with significant moisture. The preparation is characterized by a high content of active substances.

Properties

• two-component injection fluid
• low viscosity
• based on silicate and ester w
• shows the gelling effect of component B, thanks to which it can also be used in highly damp parts of the building without the need to dry them first
• material effective even when the walls are moist with tendons up to 95% - has been tested according to the WTA 4-4-04 / D instructions
• apart from restoring horizontal insulation, Koester Mautrol 2K increases the strength of concrete and masonry substrates and provides additional protection against the penetration of aggressive substances
• does not cause corrosion of the reinforcement

Application

• low-pressure injection performed to restore horizontal insulation against capillary-rise moisture in walls with moisture up to 95%
• can be used in masonry or concrete walls, as well as to strengthen masonry walls made of natural stone or brick
• inside and out
• it can also be used only to increase the strength of the wall
• for making horizontal diaphragms in walls against capillary rising moisture in accordance with the WTA 4-4-04 / D instruction, above the water damming level

Technical data

• material base silicates / silicates esters
• color milky white, transparent
• density: component A 1.16 g / cm ³ ; component B 1.09 g / cm ³
• density after mixing 1.15 g / cm ³
• initial viscosity approx. 30 mPa s
• open time approx. 30-60 min (depending on the temperature)
• consumption about 0.12 kg / m per 1 cm of wall thickness
• mixing ratio (by weight) A 100 parts: B 9 parts
• mixing ratio (by volume) A 100 volume units: B 9.4 volume units