Drizoro - Concreseal plono sluoksnio skiedinys - 1
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
2.71EUR už kg
reklaminė kaina
vieneto grynasis
2.49EUR už kg
minimalus komercinis
produkto kiekis
29.00 kg
visos kainos
grynasis kainoraštis
78.49EUR
už 29.00 kg
visos kainos
reklaminis tinklas
72.07EUR
už 29.00 kg
kainoraščio kaina
bruto vienetas 3.33EUR
už kg
reklaminė kaina
bruto vienetas
3.06EUR
už kg
minimalus komercinis
produkto kiekis
29.00 kg
visos kainos
kainoraštis bruto
96.55EUR
už 29.00 kg
visos kainos
reklaminė bruto
88.64EUR
už 29.00 kg
Produkto aprašymas
Two-component mortar based on microcement and synthetic acrylic resin, especially recommended for creating a smooth finishing and decorative coating of low thickness or sharp. It is characterized by great abrasion resistance and resistance to weather conditions.
Features
- creates an uninterrupted smooth leveling film with no joints or seams on walls and floors
- good adhesion to many different substrates: concrete, mortar, ceramic tiles, etc.
- does not require priming
- very good resistance to abrasion and weather conditions
- suitable for use under water immersion
- very low water absorption: suitable for humid places such as kitchens or bathrooms
- easy and clean material for application
- allows diffusion and water vapor permeability
Application
- decorative finish smoothing and sealing mortar in exterior and interior applications
- smooth decorative finish of Maxseal or Maxseal Flex waterproofing coatings in swimming pools, ponds, artificial lakes, etc.
Technical data
- external appearance and color of component A - white, milky liquid
- external appearance and color of component B gray or white powder
- specific gravity of component A (liquid) at 20 ° C and 50% relative humidity 1.00 0.10 g / cm 3
- specific gravity of component B (powder) at 20 ° C and 0.90 0.10 g / cm 3 relative humidity
- weight ratio of the component in A: B in the mix: 9:20
- minimum application temperature of substrate and surroundings> 5 ° C
- Shelf life of the A + B mix at 20 C and 50% relative humidity approx. 20–30 min
- time interval between the application of successive layers at a temperature of 20 C and a relative humidity of 50%> 30 min
- setting time at 20 ° C and 50% relative humidity 3–4 h
- maturing time before putting into service for pedestrian traffic at 20 ° C and 50% relative humidity 24 hours
- compressive strength after 28 days> 45 MPa (according to EN 12190)
- adhesion to concrete after 28 days> 1.5 MPa (according to EN 1542)
- layer thickness 0.20-0.25 mm
- consumption per one layer / total 0.20–0.25 / 0.4–0.5 kg / m 2
- package 29 kg
Techniniai duomenys - savybės
priedai