„Kabe“ - „Kabe Therm NV Klima“ šilumos izoliacijos sistema
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
0.00EUR už m2
reklaminė kaina
vieneto grynasis
0.00EUR už m2
minimalus komercinis
produkto kiekis
1.00 m2
visos kainos
grynasis kainoraštis
0.00EUR
už 1.00 m2
visos kainos
reklaminis tinklas
0.00EUR
už 1.00 m2
kainoraščio kaina
bruto vienetas 0.00EUR
už m2
reklaminė kaina
bruto vienetas
0.00EUR
už m2
minimalus komercinis
produkto kiekis
1.00 m2
visos kainos
kainoraštis bruto
0.00EUR
už 1.00 m2
visos kainos
reklaminė bruto
0.00EUR
už 1.00 m2
Produkto aprašymas
The Kabe Therm NV Klima system is used to insulate the external walls of buildings with perforated polystyrene boards in the technology of a seamless BSO insulation system. It is used in single and multi-family housing, public and industrial buildings, both in existing buildings and newly built buildings up to 25 m high (for buildings erected before April 1, 1995 up to and including the eleventh floor). The Kabe Therm NV Klima system with perforated foamed polystyrene boards, in addition to adequate thermal insulation, also provides exceptional diffusion properties. The reduced coefficient of diffusion resistance of the perforated plate (m = 10!) Allows the wall to dry evenly throughout the entire section. This allows for a significant reduction in the drying period of the walls (it is comparable with the use of mineral wool), and faster commissioning of the building. It is also possible to thermorenovate damp walls (without salt efflorescence) and to insulate walls made of material with low diffusion resistance (i.e. cellular concrete, porous ceramics or slag concrete). Thanks to the simple technology and long-term durability, it creates aesthetic facades with high resistance to adverse weather conditions. The finishing layer of the system is polysilicate, low-alkali silicate plaster Novalit T, possible to make in a wide range of colors and textures.
Technical data:
- type of thermal insulation layer: KLIMA perforated polystyrene boards,
- thickness of the thermal insulation layer: 60 mm, 80 mm, 100 mm, 120 mm,
- method of fixing thermal insulation: gluing or gluing and mechanical fastening,
- mechanical connector: optional (specified in the technical design),
- reinforcing fabric: glass fiber mesh with a basis weight of 145 or 160 g / m2,
- fire classification: fire retardant system (NRO),
- invoices: full, brushed / mixed,
- grain thickness: 1.5 mm; 2.0 mm; 2.5 mm, 3.0 mm,
- adhesion: to concrete - greater or equal to 0.3 MPa; for foamed polystyrene - greater than or equal to 0.1 MPa,
- interlayer adhesion: greater or equal to 0.1 MPa,
- water absorption (after 24 hours): smaller or equal 1000 g / m2,
- impact resistance: greater or equal to 3 J,
- color: natural white,
- has the ability to give away moisture freely,
- prevents condensation inside the partition,
- ensures adequate thermal insulation of walls.
The system is subject to individual valuation.
Techniniai duomenys - savybės
priedai