Professional mortar for sticking all types of tiles, incl. terracotta, ceramic, clinker, stoneware, including large-format, floor and wall tiles, for both rigid and deformable substrates, with good or poor adhesion, inside - and in the case of frost-resistant tiles - outside the building, including on terraces and balconies (with a slope of> 2%). It is characterized by deformability and frost resistance.

Application

• for balconies and terraces
• humid rooms (bathrooms, laundries, kitchens)
• for cement and anhydrite screeds with underfloor heating
• sticking tiles also in swimming pools and saunas
• fixing the tile to the reinforced layer in thermal insulation systems
• on old ceramic tiles
• for terrazzo and oil paints
• for large format tiles
• on difficult substrates such as fibreboards and chipboards
• bonding tiles and granite element
• large-size plates, quartz sinters with an edge greater than 120 cm

Technical data

• grain size 0.3 mm
• C2TES1 classification (according to EN 12004 + A1)
• shelf life after mixing with water: about 3 hours (at a temperature of +20 C)
• time for laying tiles after applying the adhesive to the substrate up to 30 minutes
• correction time up to 30 minutes
• possibility of walking on the finished floor after about 12 hours
• possibility of pointing after about 36 hours
• mixing ratio with water about 8.0 liter in water for 25 kg of dry mix
• layer thickness from 2 to 15 mm
• average consumption per 1m ^{2 is} about 4.5 kg
• approximate consumption for a 6 mm notched trowel - about 3 kg; for 8 mm notched trowel - about 4 kg; for a 10 mm notched trowel - about 5 kg
• capacity for an average consumption of about 5.5 m ² per package
• adhesion ≥ 1.0 N / mm
• soluble chromium VI content ≤ 0.0002%
• package 25 kg