Mortar for fixing ceramic tiles, factory prepared as a dry mix of binders, mineral fillers and modifying admixtures. After mixing with water, it forms a homogeneous adhesive mass for thin-film application. After hardening, water and frost resistant. It is characterized by high flexibility and adhesion.

Destiny

The mortar is intended for gluing ceramic wall and floor tiles with absorbability <0.5% (especially porcelain stoneware), both to rigid and deformable surfaces, well or poorly adhesive, inside - and in the case of using frost-resistant tiles - outside the building , including on terraces and balconies (with a decrease of> 2%). It can also be used to fix other types in tiles (glaze, terracotta, clinker). Substrates may be: ordinary concretes, lightweight aggregate concretes, cellular concretes, cement and cement-lime plasters, load-bearing limestone plasters, gypsum plasters, gypsum plasterboard and gypsum fiber boards, cement and anhydrite screeds, also with floor heating, old ceramic tile cladding, internal cast asphalt, wall and wall boards, surfaces covered with liquid foil or sealing mortar.

Technical data

• mortar type and class according to PN-EN 12004: 2002 / A1: 2003: C1T,
• adhesion after 28 days to a standard concrete base: ≥ 0.5 MPa,
• soluble chromium VI content: ≤ 0.0002%,
• Storage: Up to 12 months from the date of production, in dry places and in undamaged factory packaging,
• the product has the required documents for use.