Neotherm - polistirenas Neodach Podłoga Super
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
68.63EUR už m3
reklaminė kaina
vieneto grynasis
57.31EUR už m3
minimalus komercinis
produkto kiekis
1.00 m3
visos kainos
grynasis kainoraštis
68.63EUR
už 1.00 m3
visos kainos
reklaminis tinklas
57.31EUR
už 1.00 m3
kainoraščio kaina
bruto vienetas 84.41EUR
už m3
reklaminė kaina
bruto vienetas
70.49EUR
už m3
minimalus komercinis
produkto kiekis
1.00 m3
visos kainos
kainoraštis bruto
84.41EUR
už 1.00 m3
visos kainos
reklaminė bruto
70.49EUR
už 1.00 m3
Produkto aprašymas
Neodach Floor Super Styrofoam board is designed for thermal insulation in buildings with a payload of up to 2.4 t / m, has specific physical and mechanical properties, natural hydrophobicity, dimension stability after application, good thermal insulation properties, as well as high mechanical strength. It is also resistant to aging. In addition, the plate is absolutely ecological, free of compounds in FCKW, which destroy the ozone layer, safe for health, does not irritate the skin and does not cause allergies.
Application
- in accordance with RTQ ITB Technical and Quality Recommendation -1212/2010, in particular roof insulation and in-use payloads up to 2.4 t / m
- for thermal insulation of roof in utility and non-usable, flat and sloping, new and regenerated
- to perform thermal insulation of floors on the ground and on a reinforced concrete ceiling normally loaded.
attention
Styrofoam boards are produced with two types of edges with dimensions: Not milled: 1000 x 500 mm, board thickness from 10 to 500 mm in steps of 10 mm. Milled overlap: 980 x 480 mm panel thickness from 50 to 150 or 200 mm (depending on the production plant) in steps of 10 mm. Milled edges: additional payment PLN 5.00 / m. Please provide information about the thickness and finish of the panel edges in the commentary to the order. Due to frequent price movements, for reasons beyond our control, please confirm the price each time you buy.
Techniniai duomenys - savybės
- deformacija tam tikromis gniuždymo apkrovos ir temperatūros sąlygomis:
- <= 5 %
- gaisro klasifikacija – reakcija į ugnį:
- E
- gniuždymo įtempis esant 10 % santykinei deformacijai:
- ≥ 80 kPa,
- gyvoji apkrova [t / m²]:
- ≤ 2,4 T / m
- ilgis (matmenų leistinų nuokrypių klasė):
- ± 3 mm
- kvadratiškumas (matmenų leistinų nuokrypių klasė):
- ± 5/1000 mm / mm
- lenkimo stiprumas:
- ≥ 125 kPa,
- lygumas (matmenų tolerancijos klasė):
- ± 10 mm
- matmenų stabilumas pastoviomis normaliomis laboratorinėmis sąlygomis DS (N) 5:
- ± 0,5 %
- matmenų stabilumas tam tikromis temperatūros ir drėgmės sąlygomis DS (70, -) 2:
- <= 2 %
- plotis (matmenų leistinų nuokrypių klasė):
- ± 3 mm
- šilumos laidumo koeficientas λ:
- 0,038 W / mK
- storis (matmenų leistinų nuokrypių klasė):
- ± 2 mm
priedai