Kategorijos

Nexler-dviejų komponentų epoksidinis sandariklis Epolis EP-603 lygis

gamintojas: Nexler

kategorija: IZOHAN - statybinė chemija, hidroizoliacija

Produkto Nr.: 34230

Užsakyto numerio kartotinis: 1 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
19.17EUR
kg
reklaminė kaina
vieneto grynasis
16.83EUR
kg
minimalus komercinis
produkto kiekis
2.00 kg
vienetas
prekyba
2.00 kg
visos kainos
grynasis kainoraštis
38.34EUR
2.00 kg
visos kainos
reklaminis tinklas
33.66EUR
2.00 kg
kainoraščio kaina
bruto vienetas
23.58EUR
kg
reklaminė kaina
bruto vienetas
20.70EUR
kg
minimalus komercinis
produkto kiekis
2.00 kg
vienetas
prekyba
2.00 kg
visos kainos
kainoraštis bruto
47.15EUR
2.00 kg
visos kainos
reklaminė bruto
41.40EUR
2.00 kg

Produkto aprašymas

Two-component, epoxy pouring mass used to fill expansion joints, as well as to close cracks and cracks.

Features

  • resistant to acid or alkaline media, to water, sea and industrial atmosphere, oil, gasoline
  • very good adhesion to the substrate (concrete, ceramic cladding, resin floors)
  • creates a coating resistant to mechanical stress (abrasion, impact)
  • resistant to domestic wastewater (sewage treatment plants)

Application

  • filling expansion gaps from 5 to 35 mm on horizontal surfaces inside and outside the building
  • closing scratches and cracks on horizontal surfaces, also loaded with circular traffic

Technical data

  • composition epoxy resin, hardener, filler, pigment, additives
  • gray color (RAL 7040)
  • substrate and ambient temperature during application and bonding from +15 C to +30 C
  • ratio component A: component B: 100: 54 (by weight)
  • density 1.2 g / cm 3
  • time to use the mixed component in 45 min
  • initial drying time approx. 6 h (coating)
  • time of full hardening of the coating 7 days
  • breaking strength approx. 350 N
  • elastic return ≥ 40%
  • volume change ≤ 25%
  • flow resistance ≤ 3 mm
  • elongation at break ≥ 60%
  • amplitude 12.5%
  • consumption from 0.035 to 0.54 kg / rm depending on the size of the gap
  • the product complies with the Polish standard PN EN ISO 11600 type F class 12.5 E-M1p
  • packaging: set A 1.3 kg bucket + B 0.7 kg bottle

priedai