Promat - EI120 tikrinimo durys
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
184.88EUR už vnt
reklaminė kaina
vieneto grynasis
165.28EUR už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
grynasis kainoraštis
184.88EUR
už 1.00 vnt
visos kainos
reklaminis tinklas
165.28EUR
už 1.00 vnt
kainoraščio kaina
bruto vienetas 227.40EUR
už vnt
reklaminė kaina
bruto vienetas
203.29EUR
už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
kainoraštis bruto
227.40EUR
už 1.00 vnt
visos kainos
reklaminė bruto
203.29EUR
už 1.00 vnt
Produkto aprašymas
Inspection door for installation in non-load-bearing Siniat plasterboard walls. They consist of two frames made of aluminum angle bar: external (frame) and internal, which constitute the structural frame of the door leaf. The door has an intumescent fire seal about 1 mm thick, glued to the leaf around the entire perimeter of the door.
Application
Single-leaf Promat inspection doors are used in Promat shaft walls, massive walls (monolithic, reinforced concrete, prefabricated or masonry), as well as in lightweight walls with a fire resistance class not lower than the fire resistance of the inspection door. They allow you to carry out the necessary inspections, inspection and maintenance of the system in installations in fire-protected walls and shafts.
Features
- doors delivered ready for assembly
- hand-made
- the use of boards with increased fire resistance Nida Ogień + allows for high parameters in the field of fire protection
- inspection door frames made of high-quality aluminum ensure high durability and rigidity of the structure
- the unique design of the inspection door guarantees fire resistance against the action of fire from both sides, i.e. from the outside and inside
- use of Promatect-XS fire protective boards
- National technical assessment ITB-KOT-2019/1075
- National Certificate of Constancy of Performance No. AC158-UWB-W1704
- National declaration of performance KDWU-44
- storage in dry places
Construction
- door leaf filling: Nida Ogień + plasterboards 2 x 12.5 mm thick
- inner side of the leaf: an additional layer of Promatect-XS boards, 2 x 12.5 mm thick
- door frame cladding on the front side: Nida Ogień + plasterboard, 2 x 12.5 mm thick
- thickening of the frame: up to 60 mm due to additional strip of Promatect-XS boards with a thickness of 1 x 15 + 1 x 20 mm
- frame from the inside: intumescent fire seal 2 mm thick
- inner side of the frame: a ring made of Promatect-XS boards, 2 x 12.5 mm thick
- rim on the inside: glued intumescent fire seal about 1 mm thick
- additional equipment: the possibility of installing a round cylinder lock in the system of one or more keys
Note: The overall dimensions of the access door are larger than those given by 110 mm.
Techniniai duomenys - savybės
priedai