Purmo - „Aquilo FMK 90“ tranšėjos šildytuvas
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
0.00EUR už vnt
reklaminė kaina
vieneto grynasis
0.00EUR už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
grynasis kainoraštis
0.00EUR
už 1.00 vnt
visos kainos
reklaminis tinklas
0.00EUR
už 1.00 vnt
kainoraščio kaina
bruto vienetas 0.00EUR
už vnt
reklaminė kaina
bruto vienetas
0.00EUR
už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
kainoraštis bruto
0.00EUR
už 1.00 vnt
visos kainos
reklaminė bruto
0.00EUR
už 1.00 vnt
Produkto aprašymas
Aquilo FMK is a ductless heater without a fan. Intended for floors of heated rooms. The heating element is a copper-aluminum heat exchanger mounted in a galvanized steel tub. The bathtub (from the inside) and the exchanger are painted black. From the top, the radiator is protected by a transverse or longitudinal cover grille (to be ordered separately).
Technical data
- exchanger material: copper tubes with aluminum fins
- bathtub material: galvanized steel sheet as standard (black powder coated RAL 9005 on the inside); optional stainless steel
- grille material: wood (oak, beech); duralumin (natural, light brown, dark brown or black); stainless steel
- Connections 2 x G 1/2 '' internal thread
- working pressure 10 bar
- pressure 13 bar
- maximum temperature 110 C
- height 90 mm
- length from 1000 to 3500 mm
- width 180, 260, 290, 340, 420 mm
- 10 years warranty
Thermal power of the radiator given according to PN-EN 442.
Building
1 - rolled up crosswise grid or longitudinal grid - the drawing shows the longitudinal grid for which reinforcing mounting crossbars are required
2 - optional finishing strips type L, Z or U (only for the PML, PMZ and PMU grilles; not available for the type PMO) - the drawing shows the type Z strip
3 - convection plate
4 - heat exchanger
5 - masking plate connection to central heating installation
6 - radiator bathtub
7 - air vent
8 - fastening elements to the ground
9 - connection culverts for central heating installation (to break down)
10 - reinforcing mounting bars (only for longitudinal grilles)
Equipment
heat:
- manual air vent
- two side covers for the heat exchanger
- set of flexible 10 cm long stainless steel connections with G 1/2 '' thread
Bath:
- M8x30 mm leveling screws with an internal hexagon (for tub length up to 2.5 m - 4 pcs, above 2.5 m - 6 pcs)
- 4 fixing accessories to the base with fixing screws for the bathtub
- break-through bushings for connecting central heating installations
- 2 rubber grommets for connecting the electrical installation
- steel sheet cover masking connections to the heat exchanger
- a fibreboard that protects the heat exchanger and the bathtub against damage or contamination during installation and protects against deformation of the bathtub during concreting
Techniniai duomenys - savybės