Kategorijos

Qmar - greitai džiūstantys universalūs klijai

gamintojas: Qmar

kategorija: QMAR - statybinės cheminės medžiagos

Produkto Nr.: 15529

Užsakyto numerio kartotinis: 12 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
3.58EUR
vnt
reklaminė kaina
vieneto grynasis
3.35EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
grynasis kainoraštis
3.58EUR
1.00 vnt
visos kainos
reklaminis tinklas
3.35EUR
1.00 vnt
kainoraščio kaina
bruto vienetas
4.40EUR
vnt
reklaminė kaina
bruto vienetas
4.12EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
kainoraštis bruto
4.40EUR
1.00 vnt
visos kainos
reklaminė bruto
4.12EUR
1.00 vnt

Produkto aprašymas

Assembly glue - a fast drying, universal glue with very good adhesion to wood, glass, hard PVC, metals and most materials in construction, such as: brick, concrete, gypsum. Retains elasticity after drying. The joints are resistant to water and temperature fluctuations up to 56 C.

Application

fixing of panels, profiles, wall and baseboard, floor, stairs, cornice, window sill, ceiling, stone and ceramic tiles

properties

  • resistance in temperatures from -18 C to +56 C
  • minimum application temperature: +10 C

Method of use

  • Adhesive surfaces should be clean, free from dust, dust, grease, grease, rust and other substances that weaken adhesion.
  • Glass, glazed surfaces, wood should be degreased with alcohol, benzine or other solvent.
  • Apply the glue on spots or strips to the adhesive material and spread it thoroughly.
  • Join surfaces and then disconnect.
  • Wait 5 minutes Reassemble and press firmly.
  • The placement of the adhesive material can only be improved by moving (without removing) the joined surfaces.
  • Keep the bonded materials in contact until the adhesive has fully cured.
  • In the case of gluing material in non-standard materials, it is recommended to perform earlier

Techniniai duomenys - savybės

Apdorojimo laikas:
5 minutės.
kietėjimo greitis:
ok. 2mm / 24h
kietėjimo sistema:
rozpuszczalnikowy
laikymo temperatūra:
od +10 do +25 ° C
nuoseklumas:
pasta
pakuotė [ml]:
300 ml
šiluminė varža po sukietėjimo:
-15 do +55 ° C
spalva:
beżowy
specifinė gravitacija:
1,57 g / cm³

priedai