Kategorijos

Qmar - papildomas grubus koncentratas 1: 6

gamintojas: Qmar

kategorija: QMAR - statybinės cheminės medžiagos

Produkto Nr.: 15688

Užsakyto numerio kartotinis: 12 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
7.73EUR
vnt
reklaminė kaina
vieneto grynasis
7.16EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
grynasis kainoraštis
7.73EUR
1.00 vnt
visos kainos
reklaminis tinklas
7.16EUR
1.00 vnt
kainoraščio kaina
bruto vienetas
9.51EUR
vnt
reklaminė kaina
bruto vienetas
8.81EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
kainoraštis bruto
9.51EUR
1.00 vnt
visos kainos
reklaminė bruto
8.81EUR
1.00 vnt

Produkto aprašymas

EXTRA GRUNT KONCENTRAT is a modern primer in the form of a high-performance concentrate. It is used for priming highly absorbent and porous substrates, combining the features of a common primer and a deep primer.

Application

The use of primer allows for the strengthening and sealing effect of both the surface and the interior of the pores in the building material. Especially recommended for priming drywall, concrete, aerated concrete, gypsum, cement and cement-lime plaster under paints, adhesives, gypsum coats and other leveling coats.

Properties

  • colorless, non-flammable, solvent free
  • after drying, it forms a coating that increases the adhesion of adhesive masses and other surfacing compounds
  • increases resistance to scratching and regulates the absorbency of the substrate and the exchange of water vapor
  • reduces the consumption of paints for painting

Method of use

Dilute the preparation with water in the ratio: 1 part of the preparation to 6 parts of water. Mix well. It should be applied evenly to the substrate with a brush, paint roller or spray. On very absorbent substrates, the "wet on wet" priming can be repeated. Substrate temperature should be above +5 C. Drying time from 6 to 24 hours.

Performance

The consumption of the preparation depends on the degree of absorption of the substrate - 1 liter is enough for the priming of approximately 70-100 m2.

Storage

Store in places not exposed to sunlight, protecting against freezing.


Techniniai duomenys - savybės

džiovinimo laikas:
4 - 24 h
efektyvumas [m² / l]:
70 m² / l
kvapas:
słaby
kvapas:
charakterystyczny
laikymo temperatūra:
od +10 do +25 ° C
nuoseklumas:
ciecz
spalva:
biały
specifinė gravitacija:
1 g / cm³
taikymo temperatūros diapazonas:
5 - 35 ° C
visiškas grūdinimas:
1 dieną / dienų
talpa litrais:
1 L

priedai