Kategorijos

Qmar - sanitarinis silikonas

gamintojas: Qmar

kategorija: QMAR - statybinės cheminės medžiagos

Produkto Nr.: 15532

Užsakyto numerio kartotinis: 12 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
3.58EUR
vnt
reklaminė kaina
vieneto grynasis
3.14EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
grynasis kainoraštis
3.58EUR
1.00 vnt
visos kainos
reklaminis tinklas
3.14EUR
1.00 vnt
kainoraščio kaina
bruto vienetas
4.40EUR
vnt
reklaminė kaina
bruto vienetas
3.86EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
kainoraštis bruto
4.40EUR
1.00 vnt
visos kainos
reklaminė bruto
3.86EUR
1.00 vnt

Produkto aprašymas

A special silicone sealant is intended for grouting ceramic cladding, especially in the corners of the walls, in the joints of the walls with the floor and in places of expansion joints. It is also used to fill gaps in sanitary facilities, e.g. around baths, shower tray, washbasins, as well as kitchen furniture, air duct and duct in sanitary and heating installations. Due to the components contained in the composition that prevent the mold from covering the hardened joint, the sealant is used especially in sanitary rooms, e.g. bathrooms, shower cabins, toilets, kitchens, laundries and other rooms with increased humidity. It has very good adhesion to commonly used non-absorbent materials in construction, such as ceramic tiles (tiles, terracotta, stoneware, clinker), glass and porcelain, faience and enamel elements. The product can also be used on surfaces covered with strongly adhering paint and on corrosion-protected metal surfaces, but this type of application (as well as on other unusual surfaces) should be preceded by making adhesion tests. Sanitary silicone should not be used to glue aquariums, mirrors and surfaces where the silicone should have direct contact with food or drinking water. Permanently high flexibility as well as resistance to weather conditions and UV radiation allow the product to be used both inside and outside the building.

properties

  • resistant to mold and fungi,
  • permanently elastic
  • workability up to 5 minutes,
  • temperature resistance from -40 C to +180 C.

Substrate preparation and usage

Surfaces should be clean, dry and free from dust, dirt and grease. Before use, cut the end of the tube and screw the applicator on, cutting it to the proper thickness of the weld. Squeeze the mass using a suitable gun. The applied sealant can be smoothed with a spatula or other tool wetted with a soap solution or other similar agent.

attention

To avoid mistakes, check the suitability of the product for its intended use. Uncured product may be irritating to respiratory system and skin. KEEP AWAY FROM CHILDREN. shelf life: 18 months.


Techniniai duomenys - savybės

Apdorojimo laikas:
5 minutės.
kietėjimo greitis:
ok. 2mm / 24h
kietėjimo sistema:
acetatowy
laikymo temperatūra:
od +10 do +25 ° C
nuoseklumas:
pasta
šiluminė varža po sukietėjimo:
od -40 do +180 ° C
specifinė gravitacija:
0,98 g / cm³
pakuotė [ml]:
300 ml
spalva:
bezbarwny

priedai