Sika - Sikaplan G -15 hidroizoliacinė membrana
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
10.02EUR už m2
reklaminė kaina
vieneto grynasis
9.14EUR už m2
minimalus komercinis
produkto kiekis
40.00 m2
visos kainos
grynasis kainoraštis
400.99EUR
už 40.00 m2
visos kainos
reklaminis tinklas
365.74EUR
už 40.00 m2
kainoraščio kaina
bruto vienetas 12.33EUR
už m2
reklaminė kaina
bruto vienetas
11.25EUR
už m2
minimalus komercinis
produkto kiekis
40.00 m2
visos kainos
kainoraštis bruto
493.22EUR
už 40.00 m2
visos kainos
reklaminė bruto
449.85EUR
už 40.00 m2
Produkto aprašymas
Multilayer, reinforced with polyester mesh, synthetic roofing membrane, polymeric, waterproofing based on high-quality polyvinyl chloride (PVC). Contains UV radiation stabilizers and a flame retardant (in accordance with PN-EN 13956). The roof insulation membrane is used to cover flat surfaces of the roof - roof coverings mechanically attached to the roof structure base. Suitable for direct exposure in all climatic zones.
Features
- resistance to the constant exposure to wind
- resistance to common environmental pollutants
- resistance to permanent UV radiation
- hot air welding without open fire
- high vapor permeability
- possibility of recycling
Technical data
- structured surface
- dark gray bottom layer
- effective thickness 1.5 mm (-5% / + 10%) (according to PN-EN 1849-2)
- straightness ≤ 30 mm (according to PN-EN 1848-2)
- flatness ≤ 10 mm (according to PN-EN 1848-2)
- mass per unit area 1.8 kg / m (-5% / + 10% (acc. to PN-EN 1849-2)
- impact resistance: hard substrate ≥ 400 mm; soft substrate ≥ 700 mm (according to PN-EN 12691)
- hail resistance: rigid substrate ≥ 18 m / s; flexible substrate ≥ 30 m / s (according to PN-EN 13583)
- tensile strength: longitudinally (md) ≥ 1000 N / 50 mm; transverse (cmd) ≥ 900 N / 50 mm (according to PN-EN 12311-2)
- elongation: longitudinal (md) ≥ 15%; transverse (cmd) ≥ 15% (according to PN-EN 12311-2)
- dimensional stability: longitudinally (md) ≤ | 0.5 |%; transverse (cmd) ≤ | 0.5 |% - according to PN-EN 1107-2
- tear strength: longitudinally (md) ≥ 150 N; transverse (cmd) ≥ 150 N - according to PN-EN 12310-2
- shear resistance of the joint ≥ 600 N / 50 mm (according to PN-EN 12317-2)
- bendability at low temperatures ≤ -25 C (according to PN-EN 495-5)
- behavior due to external fire B ROOF (t1) <20; B ROOF (t3) <10 - according to PN-EN 13501-5
- reaction to fire class E (according to PN-EN ISO 11925-2, classification according to PN-EN 13501-1)
- resistance to UV radiation (> 5000 h / degree 0; according to PN-EN 1297)
- water vapor permeability = 20,000 (according to PN-EN 1931)
- watertightness according to PN-EN 1928
- application conditions: ambient temperature minimum -15 C / maximum +60 C; substrate temperature minimum -25 C / maximum +60 C
- storage conditions: rolls must be stored at a temperature between +5 C and +30 C, horizontally on pallets, protected against direct sunlight, rain, snow, ice, etc. do not place pallets or other materials on rolls during transport and storage
- length 20 m
Techniniai duomenys - savybės
priedai