Sika - Sikaplan G -18 hidroizoliacinė membrana
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
13.40EUR už m2
reklaminė kaina
vieneto grynasis
12.22EUR už m2
minimalus komercinis
produkto kiekis
30.00 m2
visos kainos
grynasis kainoraštis
402.02EUR
už 30.00 m2
visos kainos
reklaminis tinklas
366.63EUR
už 30.00 m2
kainoraščio kaina
bruto vienetas 16.48EUR
už m2
reklaminė kaina
bruto vienetas
15.03EUR
už m2
minimalus komercinis
produkto kiekis
30.00 m2
visos kainos
kainoraštis bruto
494.49EUR
už 30.00 m2
visos kainos
reklaminė bruto
450.95EUR
už 30.00 m2
Produkto aprašymas
Multilayer, reinforced with polyester mesh, synthetic roof membrane based on polyvinyl chloride (PVC), 1.8 mm thick. Contains UV radiation stabilizers and a flame retardant. The roof insulation membrane is used to cover flat surfaces of the roof - roof coverings mechanically attached to the roof structure base. is a hot air sealable membrane, intended for direct exposure, and suitable for use in all climatic zones.
Features
- high vapor permeability
- resistance to UV radiation
- resistance to the constant exposure to wind
- resistance to common environmental pollutants
- hot air welding without open fire
- possibility of recycling
Technical data
- matte surface
- dark gray bottom layer
- length 15 m / 20 m (-0% / + 5% (according to PN-EN 1848-2)
- width 1.54 m / 2.00 m -0.5% / + 1% (according to PN-EN 1848-2)
- effective thickness 1.8 mm (-5% / + 10% (according to PN-EN 1849-2)
- straightness ≤ 30 mm (according to PN-EN 1848-2)
- flatness ≤ 10 mm (according to PN-EN 1848-2)
- mass per unit area 2.2 kg / m -5% / + 10% (according to PN-EN 1849-2)
- impact resistance: hard substrate ≥ 500 mm; soft substrate ≥ 800 mm - according to PN-EN 12691
- hail resistance: rigid substrate ≥ 27 m / s; flexible substrate ≥ 32 m / s - according to PN-EN 13583
- tensile strength: longitudinally (md) ≥ 1000 N / 50 mm; transversely (cmd) ≥ 900 N / 50 mm - according to PN-EN 12311-2
- elongation: longitudinal (md) ≥ 15%; transverse (cmd) ≥ 15% - according to PN-EN 12311-2
- dimensional stability: longitudinally (md) ≤ | 0.5 |%; transverse (cmd) ≤ | 0.5 |% - according to PN-EN 1107-2
- tear strength: longitudinally (md) ≥ 150 N; transverse (cmd) ≥ 150 N - according to PN-EN 12310-2
- shear resistance of the joint ≥ 600 N / 50 mm (according to PN-EN 12317-2)
- bendability at low temperatures ≤ -25 C (according to PN-EN 495-5)
- behavior due to external fire B ROOF (t1) <20 B ROOF (t3) <10 - according to PN-EN 13501-5
- reaction to fire Class E (according to PN-EN ISO 11925-2, classification according to PN-EN 13501-1)
- resistance to UV radiation (> 5000 h / degree 0) (acc. to PN-EN 1297)
- water vapor permeability = 20,000 (according to PN-EN 1931)
- watertightness according to PN-EN 1928
- application conditions: ambient temperature minimum -15 C / maximum +60 C; substrate temperature minimum -25 C / maximum +60 C
- storage conditions rolls must be stored at a temperature between +5 C and +30 C, horizontally on pallets, protected against direct sunlight, rain, snow, ice, etc. do not put pallets or other materials on rolls during transport and storage; best to use within 5 years from the production date
- length 15 m / 20 m
Techniniai duomenys - savybės
priedai