Kategorijos

„Weber Deitermann“ - „Weber.tec Superflex D2“ hidroizoliacinis mikro skiedinys

gamintojas: Weber - Deitermann

kategorija: WEBER DEITERMANN - statybinė chemija

Produkto Nr.: 31781

Užsakyto numerio kartotinis: 1 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
231.17EUR
rinkinys
reklaminė kaina
vieneto grynasis
151.65EUR
rinkinys
minimalus komercinis
produkto kiekis
1.00 rinkinys
vienetas
prekyba
1.00 rinkinys
visos kainos
grynasis kainoraštis
231.17EUR
1.00 rinkinys
visos kainos
reklaminis tinklas
151.65EUR
1.00 rinkinys
kainoraščio kaina
bruto vienetas
284.34EUR
rinkinys
reklaminė kaina
bruto vienetas
186.53EUR
rinkinys
minimalus komercinis
produkto kiekis
1.00 rinkinys
vienetas
prekyba
1.00 rinkinys
visos kainos
kainoraštis bruto
284.34EUR
1.00 rinkinys
visos kainos
reklaminė bruto
186.53EUR
1.00 rinkinys

Produkto aprašymas

Weber.tec Superflex D2 is a flexible, fast-setting sealing micro-mortar. Two component product. Easy to work with. It binds without scratches or internal stress.

Technical data

  • based on cement, selected aggregate, special polymer in
  • grey colour
  • powder + liquid
  • pasty consistency
  • the possibility of further processing after 90 min
  • good adhesion to the ground
  • the number of applied layers is a minimum of 2
  • setting and hardening - hydraulic and as a result of chemical reaction
  • UV and mr resistance with
  • resistance to aging
  • density of ready-mixed mortar ~ 1.05 kg / dm 3
  • processing time ~ 45 min (at +23 C and 50% relative humidity)
  • application (air and substrate) temperature from +3 C to +30 C
  • full strength (e.g. tank filling in: after 3 days (at +23 C and 50% relative humidity)
  • traffic load and the ability to cover tiles after 4 hours
  • drying independent of atmospheric conditions (chemical bond)

Application

  • execution of horizontal and vertical waterproofing embedded in the ground of parts of buildings and structures (e.g. foundation benches, foundation walls, foundation slabs)
  • sealing plinth zones of buildings
  • sealing with negative water pressure (removing the waterproofing from the ground) - cavity up to 3 m below the groundwater table
  • secondary insulation of buildings and structures (walls, floors), also bath type
  • sealing water tank, including drinking water up to 15 m water column, as well as swimming pool, tank in sewage treatment plant
  • sealing composite (sub-tile) balcony and terrace in
  • sealing wet and damp rooms (bathrooms, showers)
  • pre-sealing and adhesive layer for sealing of polymer-bituminous mastics (KMB)
  • temporary sealing during construction
  • bonding layer on existing bituminous (asphalt) coatings

The application is possible with a masonry brush, brush, trowel, as well as a spraying aggregate.