Kategorijos

„Ytong Xella“ - korinis betonas „Forte PP2.5 / 0.4 S + GT“

gamintojas: Ytong

kategorija: YTONG XELLA - korinis betonas, sąramos sijos

Produkto Nr.: 28002

Užsakyto numerio kartotinis: 48 Įdėti į krepšelį

Pridėti į mainų sritį Klauskite produkto Praneškite apie klaidą apraše Įsigyti išsimokėtinai galima nuo 100 PLN produkto vertės arba viso užsakymo. Lizingą galima įsigyti nuo 369 PLN produkto vertės

kaina pagal užklausimą

kainoraščio kaina
vieneto grynasis
4.80EUR
vnt
reklaminė kaina
vieneto grynasis
4.14EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
grynasis kainoraštis
4.80EUR
1.00 vnt
visos kainos
reklaminis tinklas
4.14EUR
1.00 vnt
kainoraščio kaina
bruto vienetas
5.90EUR
vnt
reklaminė kaina
bruto vienetas
5.09EUR
vnt
minimalus komercinis
produkto kiekis
1.00 vnt
vienetas
prekyba
1.00 vnt
visos kainos
kainoraštis bruto
5.90EUR
1.00 vnt
visos kainos
reklaminė bruto
5.09EUR
1.00 vnt

Produkto aprašymas

Ytong Forte are blocks of the PP2,5 / 0,4 variety, which are characterized by the same high thermal insulation as the PP2 / 0,4 variety produced so far. At the same time, the new product b has a higher compressive strength (2.5 N / mm2), which allows it to be used in masonry with greater compressive strength required.

Wall with a block in Ytong Forte, thickness 24 cm thick insulation 15 cm can be used even in passive buildings! In turn, Ytong Forte blocks thick. 36.5 cm, with a heat transfer coefficient of U = 0.29 W / (m2K), are an excellent proposition for single-layer walls separating heated and unheated rooms, e.g. a garage from the living area.

Advantages of walls made of pulley in Ytong Forte:

  • high thermal insulation,
  • lower transport cost due to low weight,
  • no bridges in thermal thanks to the use of Ytong-Silka mortar and element in systemic ones,
  • non-flammable and fire resistant material.

Due to the high dimensional accuracy of the wall with the element in Ytong Forte, it builds on Ytong-Silka thin mortar, which allows for a significant reduction in masonry time and reduction of thermal bridging. The availability of a wide range of complementary elements such as: warm Ytong YN and YF lintels, rim insulation - Multipor EDW tiles and Ytong ceiling panels is of great importance in obtaining good parameters in thermal partitions from a Ytong Forte block. Thanks to these elements, the walls of the block in Ytong Forte are warm and made of a homogeneous material - cellular concrete.


Techniniai duomenys - savybės

gniuždymo stipris [N / mm²]:
2,5 N / mm²
šilumos laidumo koeficientas λ:
0,11 W / mK
matmenys [mm]:
240 x 599 x 199 mm
šilumos perdavimo koeficientas U =:
0,43 W / m2K
talpa [m²]:
5,76 m²
Vienetų skaičius ant padėklo:
48 Vnt.