Bauder - klijai Thermofol Kontaktkleber PVC folijai
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
20.94EUR už kg
reklaminė kaina
vieneto grynasis
17.71EUR už kg
minimalus komercinis
produkto kiekis
4.50 kg
visos kainos
grynasis kainoraštis
94.21EUR
už 4.50 kg
visos kainos
reklaminis tinklas
79.69EUR
už 4.50 kg
kainoraščio kaina
bruto vienetas 25.75EUR
už kg
reklaminė kaina
bruto vienetas
21.78EUR
už kg
minimalus komercinis
produkto kiekis
4.50 kg
visos kainos
kainoraštis bruto
115.88EUR
už 4.50 kg
visos kainos
reklaminė bruto
98.02EUR
už 4.50 kg
Produkto aprašymas
Bauder Kontaktkleber contact adhesive is intended for the assembly of BauderTHERMOFOL foil on approved substrates. Assembly bonding of BauderTHERMOFOL U / M membranes in the area of connections with the wall and the attic, on skylights and ventilation. Approved substrates: plastic (GFK), steel, OSB, concrete, glass. Do not use for gluing on the entire surface, on EPS and on non-laminated PUR / PIR thermal insulation.
Mounting / Application
The gluing surfaces must be clean, dry, free of grease and dust-free,
apply the adhesive on both sides with a brush, the cleaned surface can be smeared possibly twice, allow about 10 minutes for ventilation, perform a finger test (no wet places on the surface), apply the adhesive precisely and press firmly, observe safety instructions, close the container after use.
Fire protection and health protection
- Reaction to fire: flammable
- Health hazard: irritant
properties
- Material: nitrile rubber and synthetic resin dissolved in fast evaporating, flammable organic solvents
- Color: light
- Odor: solvent-specific
- Flash point: - 17 C
- Relative thickness: 0.9 0.05 g / cm2
- Viscosity: 3500 mPas
- Consumption: 200 to 300 g / m2 depending on the surface
- Storage: in closed containers for at least 18 months
- Drying time: about 10-30 minutes
- Processing temperature: optimally 15-25 C, minimum 5 C
Techniniai duomenys - savybės
- kiekis pakuotėje:
- 4,5 kg