One-component, asphalt-resin universal, permanently plastic-elastic adhesive-roofing sealant for outdoor use on vertical and horizontal surfaces.

Features

• excellent adhesive properties
• very good adhesion to mineral substrates and roofing felt
• extremely resistant to short- and long-term aging
• resistant to atmospheric agents, high and low temperatures
• cures by solvent evaporation, creating a highly elastic seal
• easy and quick to use (ready to use)

Application

• gluing (gluing) shingles in roofing felt
• filling and filling the cavity in roofing felt covers
• carrying out emergency roof repairs (removing blisters, sealing cracks and seams in the roofing felt)
• sticking roofing felt

Technical data

• composition insulating bitumens, resins, fibers, additives
• black colour
• plastic consistency paste
• drying time 10-14 days depending on the conditions and the cross section of the joint
• density 1.5 g / cm ³
• final adhesion to concrete not less than 0.5 MPa
• flow down at a temperature of 60 2 C at a slope of 45 for 5 hours of roofing felt glued with glue - no runoff
• Pensky-Martens flash point above 40 ° C
• ability to stick the felt to the roofing felt 320 N 11 N
• water content less than 0.5%
• thermal resistance after hardening from -20 C to +80 C
• substrate and ambient temperature during application and bonding from +5 C to +40 C
• joint capacity 5 x 5 mm approx. 12 rm from the cartridge
• compliance with the PN-B-24620: 1998 / Az1: 2004 standard
• 300 ml cartridges, 12 cartridges in a carton