A deeply penetrating, water-based insulation primer for dry and absorbent cement, gypsum or mineral based substrates. Suitable for heated substrates. Dedicated especially to GreenBuilding. It is used for substrates such as gypsum and cement plasters, mineral and cement screeds, gypsum and plasterboards, stable chipboards, cellular concrete, prefabricated concrete and poured on site.

Properties

• one-component, ready to use
• solvent free
• the lowest emission of volatile organic compounds
• binds dust
• environmentally and health-friendly user in
• eco-compatible and certified
• creates a compact insulating film
• reduces and regulates the water absorption of very porous substrates
• binds weaker substrates
• extends the workability of glue in natural and mildews
• for indoor use, for wall floors, also in damp rooms, for external walls
• application with a roller with short synthetic bristles or a brush

Technical data

• white liquid
• density 1 kg / dm ³
• 18 months storage in original packaging
• packaging 10 or 5 kg canister
• dilution ratio isolating agent for gypsum substrates - ready to use; absorbency regulation - ready to use / 1 part Biogrip: 2 parts water
• viscosity 12 mPa s, impeller 1 RPM 100 (Brookfield method)
• pH 8.22
• temperature of use from +5 C to +35 C
• waiting time before laying: insulation agent for gypsum substrates ≥ 4 h; regulation of absorbency of substrates ≥ 1 h
• maximum waiting time before laying ≤ 24 hours
• capacity 0.2–0.3 kg / m ²

Note: Protect against frost, direct sunlight and heat sources. Data obtained at +23 C, 50% relative humidity and no ventilation. Data dependent on temperature, ventilation and absorbency of the substrate.