Koester - dviejų komponentų hidroizoliacinė danga Koester 21
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
8.43EUR už kg
reklaminė kaina
vieneto grynasis
6.94EUR už kg
minimalus komercinis
produkto kiekis
20.00 kg
visos kainos
grynasis kainoraštis
168.56EUR
už 20.00 kg
visos kainos
reklaminis tinklas
138.85EUR
už 20.00 kg
kainoraščio kaina
bruto vienetas 10.37EUR
už kg
reklaminė kaina
bruto vienetas
8.54EUR
už kg
minimalus komercinis
produkto kiekis
20.00 kg
visos kainos
kainoraštis bruto
207.33EUR
už 20.00 kg
visos kainos
reklaminė bruto
170.78EUR
už 20.00 kg
Produkto aprašymas
Crack-bridging mineral, white, elastic coating. It has high resistance to mineral oils and aliphatic hydrocarbons. Resistant to pressurized water and mineral oils.
Properties
- two-component, solvent-free, liquid consistency
- flexible and crack bridging waterproofing material
- very high adhesion to wet and dry surfaces
- liquid consistency, thanks to which it is very easy to apply, even on complex structural elements
- coating resistant to UV radiation, which allows it to be used outdoors and indoors
- the white color reflects solar radiation, preventing the coating from heating up
- the coating has a short setting time
- high flexibility,
- resistance to aging, poor pedestrian traffic, hydrolysis and de-icing salts
- frost-resistant product
- the material is resistant to oil in synthetic and aliphatic hydrocarbons at high boiling point (up to 2 bar)
- the product is not resistant to substances containing aromatic hydrocarbons such as benzene, xylene, toluene
- does not contain volatile organic substances (VOC = 0),
- does not contain polyurethane, isocyanate or bitumen
Application
- underfloor waterproofing in buildings
- waterproofing foundation in (on the side of pressing water)
- waterproofing the tank in the flat roof above unheated rooms
- insulation under ceramic cladding, on terraces, balconies, it can also be used as a protective coating against mineral oils and aliphatic hydrocarbons
- Suitable for use as surface protection against mechanical and chemical stress, e.g. in oil sedimentation tanks
- good adhesion to masonry surfaces, concrete, cement screeds, metal, bitumen and PVC
Technical data
- White color
- pasty consistency
- mixing ratio (by weight) 2: 3 (A: B)
- application temperature from +5 C to +35 C
- substrate temperature minimum +5 C
- time to use the material after mixing approx. 45 min (1 kg of material at the temperature of +23 C)
- one layer thickness 0.5-2.0 mm
- crack bridging up to 0.4 mm
- density 1.55 g / cm 3
- CO 2 permeability: S d CO 2 = 924 m
- water vapor permeability S d <10 m (Class II)
- capillary absorption and water permeability w = 0.011 kg / m 2 xh 0.5
- thermal compatibility (with de-icing salts) meets the requirements of EN 1504-2: 2004
- tear adhesion ≥ 1.0 N / mm 2
- the product complies with the European standard EN 1504-2: 2004
- consumption 2.5-3.0 kg / m 2
- package 20 kg set
Techniniai duomenys - savybės
priedai