Koester - TS Skaidri dviejų komponentų dervos danga
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
74.65EUR už kg
reklaminė kaina
vieneto grynasis
0.00EUR už kg
minimalus komercinis
produkto kiekis
1.00 kg
visos kainos
grynasis kainoraštis
74.65EUR
už 1.00 kg
visos kainos
reklaminis tinklas
0.00EUR
už 1.00 kg
kainoraščio kaina
bruto vienetas 91.82EUR
už kg
reklaminė kaina
bruto vienetas
0.00EUR
už kg
minimalus komercinis
produkto kiekis
1.00 kg
visos kainos
kainoraštis bruto
91.82EUR
už 1.00 kg
visos kainos
reklaminė bruto
0.00EUR
už 1.00 kg
Produkto aprašymas
A transparent resin coating based on polyurethane, used for protective coatings on concrete or for covering floor coatings. It can be loaded 24 hours after application.
Properties
- two-component
- solvent-free
- high chemical resistance
- high resistance to UV radiation
- high abrasion resistance
- load the surface with pedestrian traffic after 24 hours from protection with Koester TS Transparent coating
Application
- coating of epoxy resin floor coatings Koester KB-Pox EM-VS and Koester KB-Pox LF-VL
- floor coatings should be protected only after they have been previously covered with quartz sand or colored decorative chips Koester Color Chips
- thanks to its high resistance to UV rays, the Koester TS Transparent coating can be used outdoors, such as balconies and terraces, and in technical rooms, such as laboratories, multi-functional halls, offices, production plants, garages and many more
Technical data
- viscosity about 150 mPa s (+23 C)
- mixing ratio component w (by weight) 2: 1 (A: B)
- time to use the material (at a temperature of +12 C / + 23 C) 20 min
- a density of about 1.0 g / cm
- transparent color
- application temperature minimum +5 C
- distance from the dew point temperature of at least +3 ° C
- peel strength (after 7 days) for concrete (minimum C50 / 60)> 4.0 N / mm
- consumption 0.1-0.2 kg / m 2
- packing set of 6 kg
Techniniai duomenys - savybės
priedai