Qmar - vamzdinis surinkimas ir sandarinimo putos
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
4.69EUR už vnt
reklaminė kaina
vieneto grynasis
4.20EUR už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
grynasis kainoraštis
4.69EUR
už 1.00 vnt
visos kainos
reklaminis tinklas
4.20EUR
už 1.00 vnt
kainoraščio kaina
bruto vienetas 5.77EUR
už vnt
reklaminė kaina
bruto vienetas
5.17EUR
už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
kainoraštis bruto
5.77EUR
už 1.00 vnt
visos kainos
reklaminė bruto
5.17EUR
už 1.00 vnt
Produkto aprašymas
One-component polyurethane foam in a version with a hose applicator designed for assembly, sealing and soundproofing.
Application
- installation of windows and doors
- thermal insulation of water, sewage and central heating networks
- sealing and soundproofing of cabins in motor vehicles
- filling gaps in thermal insulation when insulating buildings
properties
- it is characterized by high mechanical strength and excellent adhesion to typical materials in construction such as: brick, concrete, plaster, wood, metals, foam, hard PVC and rigid PUR foam
- has excellent thermal insulation and soundproofing parameters
- resistant to mold and mildew
Method of use
- Thoroughly clean and degrease the working substrate.
- Before use, make sure the can is positive (optimum +20 C).
- Shake the can well (for about 30 seconds) to thoroughly mix the ingredient in.
- Screw the applicator to the can, the working position for assembly is the can position "to the top".
- Apply foam from below to the gap.
- Fill the joints up to 50% deep, but not more than 5 cm per one layer, wider than 5 cm should be filled in layers,
- Moisten each layer after application with water, e.g. with a sprayer.
- Excess foam after curing should be removed mechanically (e.g. with a knife).
- After full hardening, the foam should be protected against UV rays using plaster, paints, for example.
Techniniai duomenys - savybės
- efektyvumas (laisvas putojimas):
- do 45 L
- matomas tankis:
- 19 ± 10% kg / m³
- nustatymo laikas:
- 2 - 24 h
- šiluminė varža po sukietėjimo:
- od –60 do +100 ° C
- spalva:
- kremowy
- pakuotė [ml]:
- 500 ml
priedai