Qmar - žemo slėgio pistoleto putos
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
7.06EUR už vnt
reklaminė kaina
vieneto grynasis
6.61EUR už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
grynasis kainoraštis
7.06EUR
už 1.00 vnt
visos kainos
reklaminis tinklas
6.61EUR
už 1.00 vnt
kainoraščio kaina
bruto vienetas 8.68EUR
už vnt
reklaminė kaina
bruto vienetas
8.12EUR
už vnt
minimalus komercinis
produkto kiekis
1.00 vnt
visos kainos
kainoraštis bruto
8.68EUR
už 1.00 vnt
visos kainos
reklaminė bruto
8.12EUR
už 1.00 vnt
Produkto aprašymas
A product with excellent performance for professional use. For application via foam gun. Reduced expansion during binding - does not warp the frames. Recommended for PVC profiles.
Application
Strong and durable fixing of window and door frames. Filling cracks, crevices and fractures in the walls, supplementing thermal insulation.
properties
- excellent adhesion to most materials used in construction,
- skin formation time up to 15min,
- setting time from 2 to 6 hours,
- high efficiency - up to 45 L.
Method of use
- Thoroughly clean and degrease the working substrate
- Before use, make sure the can is positive (optimum +20 C).
- Shake the can well (for about 30 seconds) to thoroughly mix the ingredient in.
- Screw the gun to the can, the working position for assembly is the can position "to the top".
- Apply foam from below to the gap.
- Fill the joints up to 60% deep, but not more than 5 cm per one layer, wider than 5 cm should be filled in layers,
- Moisten each layer after application with water, e.g. with a sprayer.
- Excess foam after curing should be removed mechanically (e.g. with a knife).
- After full hardening, the foam should be protected against UV rays using plaster, paints, for example.
Techniniai duomenys - savybės
- efektyvumas (laisvas putojimas):
- 48 L
- matomas tankis:
- 19 ± 10% kg / m³
- nustatymo laikas:
- 2 - 24 h
- šiluminė varža po sukietėjimo:
- od –60 do +100 ° C
- spalva:
- kremowy
- laikymo temperatūra:
- od +15 do +25 ° C
- matomas tankis:
- 19 ± 10% kg / m³
- pakuotė [ml]:
- 750 ml
- šiluminė varža po sukietėjimo:
- od –60 do +100 ° C
- spalva:
- kremowy
priedai