One-component, solvent-free adhesive with high adhesive strength and initial tack.

Features

• high initial tack
• fastening without tapes, nails or a screw w
• possibility of covering with water-based emulsion paints
• excellent adhesion to many substrates
• good workability
• water-dilutable
• inside for use on walls and ceilings
• outdoors, in sheltered places, for use on walls (arcades, balconies)

Application

The product is intended for bonding elements in construction indoors and in sheltered outdoor areas. It works well for fixing decorative elements such as skirting boards, wooden frames, polystyrene modules and panels, anodized aluminum, hard PVC profiles, terracotta tiles, polystyrene coffers and other wooden elements. It is used as a strong adhesive on various porous substrates, such as concrete, wood, mortars, fiber-cement elements and substrates covered with decorative coatings.

Technical data

• one-component chemical base, water dispersion
• density about 1.40 kg / dm ³ (according to PN-EN ISO 1183-1)
• Shore A hardness (after 28 days) approx. 85 (according to PN-EN ISO 868)
• shear strength approx. 3.0 MPa, adhesive thickness 1 mm (according to PN-EN 1465)
• operating temperature from −15 C to +60 C
• consumption using a tip with a diameter of 5 mm, approximately 14 m of weld is obtained from a 280 ml cartridge (approximately 20 ml / 1 m)
• slight run-off / damp patches (according to PN-EN ISO 7390)
• substrate and ambient temperature from +5 C to +35 C
• curing speed (at 23 C and 50% relative humidity) about 6 mm for 24 h (according to CQP 049-2)
• creasing time (at 23 ° C and 50% relative humidity) approx. 30 min (according to CQP 019-1)
• storage conditions: store the product in a factory-sealed, undamaged, tight packaging, in dry conditions, protected against direct sunlight, at a temperature between +5 C and +25 C; best use within 18 months from the production date
• packaging: 100 grams, 24 pcs. in a box; 400 grams, 12 pcs. Per carton