Sika-SikaProof P-12 lipni hidroizoliacinė membrana
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
31.69EUR už m2
reklaminė kaina
vieneto grynasis
28.90EUR už m2
minimalus komercinis
produkto kiekis
20.00 m2
visos kainos
grynasis kainoraštis
633.70EUR
už 20.00 m2
visos kainos
reklaminis tinklas
577.93EUR
už 20.00 m2
kainoraščio kaina
bruto vienetas 38.97EUR
už m2
reklaminė kaina
bruto vienetas
35.54EUR
už m2
minimalus komercinis
produkto kiekis
20.00 m2
visos kainos
kainoraštis bruto
779.46EUR
už 20.00 m2
visos kainos
reklaminė bruto
710.86EUR
už 20.00 m2
Produkto aprašymas
Self-adhesive, polyolefin waterproofing membrane, adhering to the entire surface, placed on the constructed structure. Made on the basis of flexible polyolefins (FPO), it is intended for the insulation of underground structures. It is covered with an adhesive-sealing layer secured with a protective layer. It is applied cold, removing the protective layer and gluing the membrane to the hardened concrete substrate primed with SikaProof Primer-01.
Features
- full-surface adhesion to a hardened reinforced concrete structure
- no water penetration between the concrete and the membrane
- high flexibility and ability to cover cracks
- high water resistance
- easy installation, tight connections (no welding)
- laid cold (does not require welding or the use of open fire
- temporary resistance to weathering and UV radiation (during installation)
- durable and resistant to aging
- resistant to aggressive factors occurring naturally in soil and groundwater
- May be combined with other approved Sika insulation and sealing systems
Application
It is used as anti-moisture and anti-water insulation and as protection of concrete underground structures with buildings and other structures located below the grutn level against the ingress of groundwater. It is used for the insulation of: vertical reinforced concrete walls, horizontal reinforced concrete slabs, ceilings, offsets and plinth, in the extension, reconstruction and repair of the object in, in the case of prefabricated structures.
Technical data
- chemical base: membrane layer flexible polyolefin (FPO); adhesive / sealant polyolefin (PO)
- light yellow membrane with a white protective layer covering the self-adhesive side
- effective thickness 1.2 mm
- impact resistance ≥ 200 mm
- resistance to static loads ≥ 20 kg
- resistance to root penetration meets
- tensile strength: longitudinal ≥ 6.0 MPa; transverse ≥ 6.0 MPa
- tensile modulus of elasticity ≤ 35 MPa (+/- 10%)
- elongation: longitudinal ≥ 350%; transverse ≥ 350%
- tear strength ≥ 100 N / 50mm (on primed concrete)
- tear resistance (nail): longitudinally ≥ 200 N; transverse ≥ 200 N
- shear resistance of the joint ≥ 125 N / 50 mm
- transfer of substrate scratches Class A5, no scratches
- reaction to fire class E
- water vapor permeability 0.50 g / mx 24 h, = 58,000 (+/- 20%) S d = 78 m
- watertightness meets (method B, 24 h / 60 kPa)
- 20 m 2 roll (width 1 m, length 20 m)
Techniniai duomenys - savybės
priedai