Arbet - fasado klasika EPS 045 polistireno plokštė
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
55.87EUR už m3
reklaminė kaina
vieneto grynasis
40.94EUR už m3
minimalus komercinis
produkto kiekis
1.00 m3
visos kainos
grynasis kainoraštis
55.87EUR
už 1.00 m3
visos kainos
reklaminis tinklas
40.94EUR
už 1.00 m3
kainoraščio kaina
bruto vienetas 68.72EUR
už m3
reklaminė kaina
bruto vienetas
50.35EUR
už m3
minimalus komercinis
produkto kiekis
1.00 m3
visos kainos
kainoraštis bruto
68.72EUR
už 1.00 m3
visos kainos
reklaminė bruto
50.35EUR
už 1.00 m3
Produkto aprašymas
Classic facade polystyrene boards can be used in applications requiring low mechanical loads, in particular for thermal insulation in the following places:
- walls made using the "light wet" (BSO, ETICS) method or "light dry" method,
- surfaces of skeleton walls,
- crevices of closed or ventilated three-layer walls,
- wreaths, jambs, lintels and other places exposed to thermal bridges,
- balcony loggias,
- layered walls;
- continuous outer layers of skeleton walls,
- wreaths in the formwork method lost to plaster,
- floors from below with the "light wet method",
- reinforced concrete floors,
- steep roofs under and between the rafters.
- In particular, for thermal insulation in the following places:
- diaphragm walls with ventilated and non-ventilated air gap,
- expansion joints in constructions,
- in internal partitions,
- walls in frame construction with cladding,
- floors from below with cladding,
- floors between joists,
- light skeleton ceilings with cladding,
- insulation between rafters,
- ventilated flat roofs.
attention
Milled edges "overlapped": surcharge 8.00 PLN / m3. Please provide information about the thickness and the method of milling the edges of the panels in the comments to the order. Plate thickness range: from 10 to 300 mm. Due to frequent price movements, for reasons beyond our control, please confirm the price each time you buy.
Techniniai duomenys - savybės
- gaisro klasifikacija – reakcija į ugnį:
- E
- ilgis (matmenų leistinų nuokrypių klasė):
- min(± 0,6%; ± 2) mm
- ilgis [mm]:
- 1000 mm
- krašto apdaila:
- proste
- kvadratiškumas (matmenų leistinų nuokrypių klasė):
- ± 5/1000 mm / mm
- kvadratiškumas (matmenų leistinų nuokrypių klasė):
- ± 5/1000 mm / mm
- lenkimo stipris BS75:
- >=50 kPa,
- lygumas (matmenų tolerancijos klasė):
- ± 15 mm
- matmenų stabilumas pastoviomis normaliomis laboratorinėmis sąlygomis DS (N) 2:
- ± 0,5 %
- matmenų stabilumas tam tikromis temperatūros ir drėgmės sąlygomis DS (70, -) 2:
- <= 3 %
- plotis:
- 500 mm
- plotis (matmenų leistinų nuokrypių klasė):
- min(± 0,6%; ± 2 mm) mm
- šilumos laidumo koeficientas λ:
- 0,045 W / mK
- storio diapazonas:
- 10 - 300 mm
- storis (matmenų leistinų nuokrypių klasė):
- ± 1 mm
priedai