Atlas - TS smulkiagrūdis restauravimo glaistas
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
22.52EUR už paketas
reklaminė kaina
vieneto grynasis
20.09EUR už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
grynasis kainoraštis
22.52EUR
už 1.00 paketas
visos kainos
reklaminis tinklas
20.09EUR
už 1.00 paketas
kainoraščio kaina
bruto vienetas 27.70EUR
už paketas
reklaminė kaina
bruto vienetas
24.71EUR
už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
kainoraštis bruto
27.70EUR
už 1.00 paketas
visos kainos
reklaminė bruto
24.71EUR
už 1.00 paketas
Produkto aprašymas
Factory prepared, dry mix based on the highest quality mineral binders, an additional and modifier, as well as quartz and trass fillers.
Features
- contains lime, a natural binder, for a century the building material used in production - the lime content determines the flexibility and resistance of the layer to cracking
- high resistance to microcracks - thanks to the content of special microfibers, which additionally strengthen the structure of the material
- very fine graining (aggregate up to 0.2 mm) - allows for a very smooth surface
- wide scope of application - the putty is easy to apply in both 1 mm and 10 mm thick layers
- white color of the plaster allowing for easy and economical covering of the surface with paint
- thanks to a specially selected recipe, it perfectly cooperates with historical mortars used for erecting the object undergoing renovation
Application
- making the final finishing layer on surfaces made of concrete, cement and cement-lime plaster, renovation plaster
- on wall surfaces and ceiling v
- inside and outside the building in
Technical data
- water / dry mix mixing ratio 7-8 l / 25 kg
- mortar preparation temperature, substrate and ambient temperature during work from +5 C to +25 C
- time of the mortar's readiness to work approx. 2 h
- open working time approx. 25 min
- minimum layer thickness 1 mm
- maximum layer thickness 10 mm
- reaction to fire A1
- water absorption W C 1
- water vapor permeability μ ≤15
- adhesion 0.3 N / mm - FP: B
- meets the requirements of PN-EN 998-1: 2016
- average consumption of about 1.5 kg of mortar per 1 m 2 , with a layer thickness of 1 mm
- package 25 kg
Techniniai duomenys - savybės
priedai