Atlas - TSG šiurkščiavilnių atnaujinimo glaistas
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
20.86EUR už paketas
reklaminė kaina
vieneto grynasis
18.60EUR už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
grynasis kainoraštis
20.86EUR
už 1.00 paketas
visos kainos
reklaminis tinklas
18.60EUR
už 1.00 paketas
kainoraščio kaina
bruto vienetas 25.65EUR
už paketas
reklaminė kaina
bruto vienetas
22.88EUR
už paketas
minimalus komercinis
produkto kiekis
1.00 paketas
visos kainos
kainoraštis bruto
25.65EUR
už 1.00 paketas
visos kainos
reklaminė bruto
22.88EUR
už 1.00 paketas
Produkto aprašymas
Factory prepared, dry mix based on the highest quality mineral binders, an additional and modifier, as well as quartz and trass fillers.
Features
- high resistance to microcracks - thanks to the content of special microfibers, which additionally strengthen the structure of the material
- specially selected graining allows for uniformity of the texture of the putty surface - after applying the putty, it creates a uniform layer, effectively masking the joints of the old plaster with the new one, places of local repairs
- wide scope of application - the putty is easy to apply in both 1 mm and 10 mm thick layers
- expedition in the color of old white - allows for easy and economical coating of the surface with paint
- thanks to a specially selected recipe, it perfectly cooperates with historical mortars used for erecting the object undergoing renovation
Application
- making the final finishing layer on surfaces made of natural stone, concrete, cement and cement-lime plaster, renovation plaster
- wall surfaces and ceiling in
- inside and outside the building in
Technical data
- water / dry mix mixing ratio 7-8 l / 25 kg
- mortar preparation temperature, substrate and ambient temperature during work from +5 C to +25 C
- time of the mortar's readiness to work approx. 2 h
- open working time approx. 25 min
- minimum layer thickness 1 mm
- maximum layer thickness 10 mm
- reaction to fire A1
- water absorption W C 1
- water vapor permeability μ ≤15
- adhesion 0.3 N / mm - FP: B
- average consumption of about 1.5 kg of mortar per 1 m 2 , with a layer thickness of 1 mm
- meets the requirements of PN-EN 998-1: 2016
- package 25 kg
Techniniai duomenys - savybės
priedai