Self-leveling leveling compound 1-12 mm. A factory-prepared, dry, cement-based mixture enriched with synthetic resins, class CT-C30-F7, used for leveling and leveling old and new substrates inside the building, as bonded to the substrate. For manual and machine laying.

Features

• very high compressive and bending strength
• very good working properties and excellent flow properties
• resistant to concentrated loads - movement of furniture castors
• refined with the addition of synthetic resins
• for use in underfloor heating and in wet rooms (bathrooms, showers, laundries, kitchens)
• creates a very smooth and rough surface

Application

• cement substrates
• repairs and leveling of substrates with underfloor heating
• perfect as a base for all types of floor coverings, such as linoleum, PVC, textile, rubber, ceramic and natural stone tiles, parquet, laminate flooring
• new and renovated living and public spaces

Technical data

• reaction to fire A1
• compressive strength (28 days) ≥ 30.0 N / mm ²
• bending strength (28 days) ≥ 7.0 N / mm ²
• recommended layer thickness 1-12 mm
• amount of water approximately 5.75 liters of water (23%) per 25 kg bag
• consumption about 1.7 kg / m ² for a layer thickness of 1 mm
• can be accessed after about 6-8 hours *
• laying floors after about 24 hours * depending on the thickness of the mass and the type of finishing layer; wood and vapor-tight cladding after reaching the required residual moisture (after CM test)
• use time about 30 minutes *
• packing 48 bags w / pallet = 1200 kg
• package 25 kg bag

* for conditions in the application at a temperature of about +20 C and 60% humidity; higher temperatures and lower humidity accelerate, lower temperatures and higher humidity delay drying times