Dry, factory-prepared cement mixture of the CT-C35-F6-A12 class used for making quick-setting cement floors and all kinds of undercoat under floors on the layers of insulation and connected with the substrate. For use on terraces and balconies and for underfloor heating. For manual and machine processing.

Features

• quick-setting and quick-drying floor or underlay
• very high compressive strength ≥ 35 MPa and high bending strength ≥ 6 MPa
• high abrasion resistance - class A12
• excellent working properties, thick-plastic consistency
• very low linear contraction
• conducts heat well in underfloor heating systems
• frost-resistant and waterproof (after setting)
• protects health and the environment - very low VOC emissions

Application

• all mineral substrates
• for making composite screeds, screeds on separating, floating and floating layers with underfloor heating
• quick-setting underlay for flooring, e.g. parquet, resin coatings and floors
• residential buildings, warehouses and public utilities
• underlay in rooms with high humidity
• allows you to get an inheritance in
• as an undercoat on terraces and balconies (it is required to lay finishing layers, e.g. ceramic cladding)
• for quick repairs (allows to shorten the technological breaks and speeds up the laying of subsequent layers) and wherever a very short time of the overall performance of works counts

Technical data

• maximum grain size 4 mm
• dry product bulk density about 1800 kg / m ³
• compressive strength (28 days) ≥ 35 N / mm ²
• bending strength (28 days) ≥ 6 N / mm ²
• A12 abrasion resistance
• thermal conductivity coefficient λ 1.4 W / mK
• water vapor diffusion resistance factor 40
• linear changes with drying ≤ 0.5 mm / m
• recommended layer thickness: bonded screeds 10-100 mm; sleepers on insulations 35-100 mm; underlays in heating systems 60-100 mm
• amount of water from 1.7 to 1.9 l of water per 25 kg bag
• consumption of about 20 kg / m ^2/10 mm thickness
• capacity about 0.25 m / bag / 50 mm layer
• possibility of entering after 3 hours *
• use time about 0.5 h *
• laying floors after 24 hours *
• VOC (VOC) <60 μg / m - EmiCode EC 1 Plus
• packing 48 bags w / pallet = 1200 kg
• package 25 kg

* for application conditions at a temperature of about +20 C and from 55 to 65% humidity and thickness up to about 50 mm; lower temperature and / or greater thickness may extend this time; practical testing of the humidity is recommended

Caution

The minimum sales unit is one pallet - 48 bags.