Coester - CT 228 Flex dviejų komponentų epoksidinė derva
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
32.03EUR už kg
reklaminė kaina
vieneto grynasis
26.89EUR už kg
minimalus komercinis
produkto kiekis
6.00 kg
visos kainos
grynasis kainoraštis
192.16EUR
už 6.00 kg
visos kainos
reklaminis tinklas
161.36EUR
už 6.00 kg
kainoraščio kaina
bruto vienetas 39.39EUR
už kg
reklaminė kaina
bruto vienetas
33.08EUR
už kg
minimalus komercinis
produkto kiekis
6.00 kg
visos kainos
kainoraštis bruto
236.36EUR
už 6.00 kg
visos kainos
reklaminė bruto
198.47EUR
už 6.00 kg
Produkto aprašymas
Colored epoxy resin, two-component used for making chemically resistant coatings on steel and concrete surfaces. The material has the ability to bridge cracks in the substrate and has a high surface value.
Properties
- two-component
- stained
- for making chemically resistant coatings on steel and concrete surfaces
- high adhesion to mineral substrates (except gypsum), as well as to steel and stainless steel
- has the ability to bridge cracks in the substrate and has a high surface hardness
Application
- chemical protection of concrete and steel substrates in industrial facilities
- on tanks in sewage treatment plants, livestock facilities, as well as in biogas plants
- on vertical and horizontal surfaces
- a protective layer of heavily loaded industrial floors
- chemically and mechanically resistant epoxy resin casing layer with quartz sand
- it can also be used in traffic areas as a closing coat of thick-layer systems in the protection of the substrate made as scratch putty
- when using the product on vertical surfaces, add Koester Stellmittel to the CT 228 Flex resin in an amount up to 6% by weight
Technical data
- a density of about 1.2 kg / l
- time to use (+10 C, +20 C) 60 min, 40 min
- application (ambient) temperature from +8 C to +30 C
- minimum substrate temperature +8 ° C
- material temperature during application from +15 C to +25 C
- color similar to RAL 7032 (other colors on request)
- adhesion: ≥ 1.5 N / mm 2 ; standard concrete C25 ≥ 1.5 N / mm 2 (failure in concrete); steel> 4 N / mm 2 (DIN EN ISO 12944-4, Ry 50 μm)
- subsequent layers after about 24 hours
- consumption: concrete min. 1.2 kg / m / mm; steel: 0.65 kg / m (500 μm)
- packing set of 6 kg
Techniniai duomenys - savybės
priedai