Drizoro-greitai kietėjantis remonto skiedinys PCC mažai susitraukiantis Maxmorter F
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
1.05EUR už kg
reklaminė kaina
vieneto grynasis
0.92EUR už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
grynasis kainoraštis
26.13EUR
už 25.00 kg
visos kainos
reklaminis tinklas
22.94EUR
už 25.00 kg
kainoraščio kaina
bruto vienetas 1.29EUR
už kg
reklaminė kaina
bruto vienetas
1.13EUR
už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
kainoraštis bruto
32.14EUR
už 25.00 kg
visos kainos
reklaminė bruto
28.21EUR
už 25.00 kg
Produkto aprašymas
Maxmorter F is a one-component mortar containing microsilica which, when mixed with water, produces a fast-setting repair mortar with high mechanical parameters. It is intended for filling cavities in concrete. It is a mortar with low shrinkage and very good adhesion to concrete and steel. The product is available in a basic version and in a variant with reduced technical parameters Maxmorter F / 1.
Technical data
Maxmorter F:
- gray powder
- oversize content greater than 0.5 to 5 mm
- bulk density 0.90 0.05 g / cm 3
- fresh mortar density 1.95 0.15 g / cm 3
- time of maintaining working properties (20 C) over 10 minutes
- consistency 125 12 mm
- bulk density of the hardened mortar 1.85 0.15 g / cm 3
- bending strength after 1 h from 1.6 MPa; after 3 h from 1.7 MPa; after 24 h from 4.0 MPa; after 7 days from 4.5 MPa; after 28 days from 6.0 MPa; after 90 days from 7.5 MPa
- compressive strength p 1 h from 8.0 MPa; after 3 h from 10.0 MPa; after 24 h from 20.0 MPa; after 7 days from 30.0 MPa; after 28 days from 45.0 MPa; after 90 days from 60.0 MPa
- shrinkage after a hardening period of 90 days below 1.2 ‰
- frost resistance tested in water after 150 freezing and thawing cycles (at -18 C / + 18 C): weight loss up to 5%; decrease in bending strength up to 20%; decrease in compressive strength after 28 days to 20%
- tear-off strength after 28 days (pull-off method) over 2.0 MPa
- consumption per 1 mm of thickness 1.5 kg / m 2
Maxmorter F / 1:
- gray powder
- maximum grain diameter 0.7 mm
- the pot life of the mixture is 6-10 min
- initial setting time 6-8 min; final 10-15 min
- amount of added water 14-15%
- compressive strength after 3 days 8.5 MPa; after 14 days, 12.5 MPa; after 28 days, 15.5 MPa
- flexural strength after 3 days 2.6 MPa; after 14 days 5.5 MPa; after 28 days, 6.0 MPa
- consumption per 1 mm of thickness 1.5 kg / m 2
Application
- mortar for mounting manholes in and inlet in streetlights
- concrete repair in building structures where quick commissioning is required
- repair in engineering and bridge structures, in road construction
- surface repair with dry shotcrete technology
- anchoring the element in steel in concrete
- increasing the thickness of horizontal concrete surfaces
- chemical resistance to sea water and sulphated water
Techniniai duomenys - savybės
priedai