Drizoro - greitai kietėjantis skiedinio Watmat skystis
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
1.34EUR už kg
reklaminė kaina
vieneto grynasis
1.17EUR už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
grynasis kainoraštis
33.41EUR
už 25.00 kg
visos kainos
reklaminis tinklas
29.14EUR
už 25.00 kg
kainoraščio kaina
bruto vienetas 1.64EUR
už kg
reklaminė kaina
bruto vienetas
1.43EUR
už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
kainoraštis bruto
41.10EUR
už 25.00 kg
visos kainos
reklaminė bruto
35.84EUR
už 25.00 kg
Produkto aprašymas
Liquid watmat is a fast-setting, non-shrinking potting mortar. Occurs as a one-component product based on special cement and admixtures, for mixing only with water. Does not contain chloride and metallic aggregate. It is available in two variants: Watt winter liquid watmat (at ambient temperature up to 15 C), S summer liquid watmat (from 15 C). It has good adhesion to the ground. A color similar to that of concrete. Liquid watmat is a self-leveling mortar.
Technical data
- gray powder
- maximum grain thickness less than 0.8 mm
- powder density 1.24-1.38 g / cm 3
- volume density of mortar mixed with water 2.15 g / cm 3
- working time (at 20 C) at least 10 min
- consistency of fresh mortar 11-13 cm
- bending strength after 1 h from 3 MPa; after 2 h from 3 MPa; after 4 h from 4 MPa; after 1 day from 8 MPa; after 7 days from 9 MPa; after 28 days from 13 MPa
- compressive strength after 1 h from 12 MPa; after 2 h from 17 MPa; after 4 h from 38 MPa; after 1 day from 49 MPa; after 7 days from 50 MPa; after 28 days from 60 MPa
- coefficient of elasticity under compression of 20-40 GPa
- shrinkage after a hardening period of 56 days at most 0.78 ‰
- swelling after 90 days to 0.3 ‰
- adhesion to the ground, pull-off method: without F200 frost resistance test at least 2 MPa; after testing frost resistance F 200 from 1.5 MPa
- frost resistance after 200 cycles: weight loss not exceeding 5%; a maximum 20% decrease in flexural strength; 20% decrease in compressive strength
- consumption of 1.8 kg / m 2 / mm
Application
- installation of manhole and inlet in sewage system
- pouring stone crushed stone into the foundation of a communication line
- mounting anchor bolts, balustrades, pole
- repair of stairs in and curb in
- repair of defects in concrete surfaces, parking panels
- increasing the thickness of horizontal concrete surfaces
- use in rooms with poor ventilation - thanks to non-toxicity and odorlessness
- chemical resistance
- resistance to oil and oil materials
- acid resistance according to pH above 3
Chemical resistance to various solutions (ASTM-267):
Techniniai duomenys - savybės
priedai