Maxgrip is a combination of high-performance hydraulic cement, aggregates and modifying agents that, when mixed with water, form a mortar. It is designed to repair the loss of anchoring. The setting time is only 15 minutes.

Technical data

• gray powder
• bulk density 1.30 0.05 g / cm ³
• mixing with water (by weight) 15-17%
• setting time (at 20 C) 15 min
• fresh mortar density 2.10 0.10 g / cm ³
• bending strength after 1.5 h from 2 MPa; after 24 h from 3 MPa; after 7 days from 4 MPa; after 28 days from 5 MPa
• compressive strength after 1.5 h from 10 MPa; after 24 h from 25 MPa; after 7 days from 40 MPa; after 28 days from 45 MPa
• resistance to detachment from the concrete substrate after 28 days, by the pull-off method from 0.6 MPa
• adhesion to the substrate, pull-off method, 1.63 MPa after frost resistance test
• approximate consumption 2.0 kg / l

Application

• repairing a cavity in concrete
• anchoring foundation bolts, balustrades, w
• fastening of all kinds of machines
• embedding a sign in the road
• where very strong and quick anchoring is required
• corrosion protection

Maxgrip is an expansive mortar - there is an increase in volume during setting. It is waterproof. It quickly achieves high mechanical parameters. It does not contain iron or sulfur particles. Does not cause oxidation or rust formation.

Required diameters and depths of the hole for anchoring foundation bolts: