Drizoro - injekcinė dervos „Maxurethane Injection“
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
18.92EUR už kg
reklaminė kaina
vieneto grynasis
18.40EUR už kg
minimalus komercinis
produkto kiekis
50.00 kg
visos kainos
grynasis kainoraštis
945.88EUR
už 50.00 kg
visos kainos
reklaminis tinklas
919.76EUR
už 50.00 kg
kainoraščio kaina
bruto vienetas 23.27EUR
už kg
reklaminė kaina
bruto vienetas
22.63EUR
už kg
minimalus komercinis
produkto kiekis
50.00 kg
visos kainos
kainoraštis bruto
1,163.44EUR
už 50.00 kg
visos kainos
reklaminė bruto
1,131.30EUR
už 50.00 kg
Produkto aprašymas
A two-component, solvent-free, polyurethane injection resin that reacts to form a foam upon contact with water, expanding its volume, causing a strong seal.
Features
- the product reacts with water
- it is not a hydrophilic, but a hydrophobic type of resin, therefore the resulting foam does not absorb water, is not affected by the drying of water, does not shrink or swell
- only requires the use of one-component injection equipment; reacts with the outflowing water or the moisture present in the ground
- low viscosity, even during injection procedure, which ensures good and deep penetration
- the product does not shrink
- the stability of the chemical structure of the foam ensures high durability, high mechanical strength, and the ability to resist high water pressures
- eco-friendly
- the ability to regulate the gelation time by adding the appropriate amount of Maxurethane Injection CAT catalyst (not included in the kit)
- excellent performance; water does not dissolve the agent
- high degree of swelling, up to 15 times
- the product can be used both for cutting off the flow of water and for strengthening the soil
Application
Cutting off the water flow in:
- damaged, cracked or porous concrete
- structural and expansion joints in concrete
- brick structures
- sewage pipes, manholes, tunnels, dams
- sewage tanks and drinking water tanks
- filling large cavities and cracks in stone and concrete structures
- soil strengthening
Technical data
- component A / component B / catalyst
- appearance viscous liquid / viscous liquid / viscous liquid
- density (20 C) 1.23 0.05 / 1.00 0.05 / 0.95 0.05 g / cm 3
- freezing point + 10 / -31 / -31 C
- flash point> 200 /> 200 /> 200 ° C
- optimal storage temperature: 20-35 / 10-20 / 10-20 C
- A: B mix ratio 2: 1 by weight
- mixing ratio by volume A: B 1.62: 1
- content constituent in solids A + B (by weight) 100%
- catalyst content (by weight for A + B mix) 2-10%
- induction time with catalyst content 2% / 5% / 10% in 80-90 / 40-45 / 20-25 s
- total catalyst reaction time 2% / 5% / 10% 4 / 140-160 / 80-90 min
- characteristics of the bound product - swelling amount (final volume: initial volume) 10-20: 1
- density with free foam formation 50-100 kg / cm 3
- compressive strength 30-150 kg / cm 3
- Toxicity Non-toxic, solvent free
- no water solubility
- chemical resistance - resistant to most organic solvents, diluted with acid and microorganism
- 50 kg kit: component A 25 kg + component B 25 kg
Techniniai duomenys - savybės
priedai