One-component material, ready to use, consisting of hydro-polyurethane aliphatic resins, for exterior applications. The product creates an elastomeric membrane with protective and waterproofing properties and excellent resistance to UV radiation.

Features

• Excellent scratch-bridging ability - acts as a scratch-bridging membrane
• creates an uninterrupted waterproofing membrane without joints and seams, permanently seals cracks and adapts to the geometry of the substrate
• environmentally friendly material, non-toxic
• high color stability (does not chew), resistance to weather conditions and UV radiation
• excellent adhesion to materials from the Maxelastic PUR group and other polyurethane coatings
• very good flexibility at high and low temperatures - absorbs ground movements caused by object settling, vibrations and thermal movements caused by extreme weather conditions
• ready-to-use material
• easy to apply by hand (brush, roller, etc.) or mechanically (spraying), not requiring qualified personnel
• applied cold
• based on water
• solvent-free
• incombustible

Application

• protection against UV radiation and wear due to pedestrian traffic, all types of roof and ceiling, both flat and sloped, in combination with Maxelastic PUR and Maxelastic PUR-W
• waterproofing of the substrate
• anti-corrosion protection with an aesthetic finish of metal structures in the marine environment: platforms, tank in, crane, etc.
• UV resistant protection and finish system in epoxy and polyurethane for outdoor applications
• single waterproofing membrane for all kinds of outdoor applications: ceilings, roofs, terraces, balconies, facades, partitions, vertical walls, etc.
• waterproofing membrane for all types of civil and industrial structures: bridges, cooling towers, chimneys, etc.

Technical data

• external appearance one-component, homogeneous paste
• specific gravity 1.05 0.1 g / cm ³
• The minimum application temperature of the substrate and the environment> 5 ° C
• time interval between application of the next layer temperature 20 C 3–6 h
• maturing time at 20 ° C and 50% relative humidity: 1 days before putting into service for pedestrian traffic; 7 days before the pour test and pouring concrete or fresh mortar
• tensile strength 5.2 N / mm ² (according to ASTM D-412)
• elongation to the break point 373% (according to ASTM D-412)
• consumption as a single waterproofing membrane for one layer / total 0.8-1.0 / 1.6-2.0 kg / m ²
• consumption as protection against UV radiation and against wear due to foot traffic per layer / total 0.25–0.50 / 0.25–1.0 kg / m ²
• package: 22 kg bucket