Drizoro - Maxepox AC gruntas metaliniams paviršiams
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
10.97EUR už kg
reklaminė kaina
vieneto grynasis
10.12EUR už kg
minimalus komercinis
produkto kiekis
10.00 kg
visos kainos
grynasis kainoraštis
109.66EUR
už 10.00 kg
visos kainos
reklaminis tinklas
101.21EUR
už 10.00 kg
kainoraščio kaina
bruto vienetas 13.49EUR
už kg
reklaminė kaina
bruto vienetas
12.45EUR
už kg
minimalus komercinis
produkto kiekis
10.00 kg
visos kainos
kainoraštis bruto
134.89EUR
už 10.00 kg
visos kainos
reklaminė bruto
124.49EUR
už 10.00 kg
Produkto aprašymas
A water-borne and epoxy primer that inhibits the corrosion process, which forms a highly effective anti-corrosive protective coating, especially on metal surfaces.
Features
- binary
- non-toxic
- creates a protective barrier against water, chlorine ions and gases
- has excellent corrosion inhibition properties
- perfectly adheres to steel and other metal surfaces
- has very good abrasion resistance
- it is not susceptible to moisture absorption
- solvent-free, non-flammable
- as a virtually odorless material, it can be used in poorly ventilated rooms
- demonstrates high durability
- easy to apply and clean
Application
- anti-corrosive protective coating for all metal surfaces such as steel, aluminum or other, intended for use in pipelines, tanks, bridges, metal structures, tunnels
- primer for metal surfaces, intended for use before the application of a polyurethane coating resistant to UV rays, type Maxurethane 2C
- primer for metal surfaces, intended for use before the application of the solvent-free epoxy coating, type Maxepox 800 and Maxepox Flex
Technical data
- 5: 1 component in A and B mixing ratio by weight
- external appearance red liquid
- density 1.34 g / cm 3
- element content in solids 71% by weight
- element by volume in solids 53%
- application and maturation temperature> 10 ° C
- shelf life 10 kg of the product at temperatures of 10 C / 20 C / 30 C - 180/120/60 min
- drying time without sticking of the product at the temperature of 20 C 6-8 h
- total time of maturation and putting into service at 10 C / 20 C / 30 C - 8/5/3 days
- adhesion to metal 5.4 MPa (according to ASTM D-4541)
- consumption ٭ per one layer 0.25 kg / m 2
- thickness of the dry film making up one layer 100 m
* the consumption is indicative and may vary depending on the product used, roughness and condition of the substrate
Techniniai duomenys - savybės
priedai