Drizoro - Maxepox CEM epoksidinio cemento skiedinys
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
2.86EUR už kg
reklaminė kaina
vieneto grynasis
2.62EUR už kg
minimalus komercinis
produkto kiekis
20.00 kg
visos kainos
grynasis kainoraštis
57.17EUR
už 20.00 kg
visos kainos
reklaminis tinklas
52.40EUR
už 20.00 kg
kainoraščio kaina
bruto vienetas 3.52EUR
už kg
reklaminė kaina
bruto vienetas
3.22EUR
už kg
minimalus komercinis
produkto kiekis
20.00 kg
visos kainos
kainoraštis bruto
70.32EUR
už 20.00 kg
visos kainos
reklaminė bruto
64.45EUR
už 20.00 kg
Produkto aprašymas
Tr j-component mortar based on epoxy resin and cement, especially recommended for repair, leveling and protection of concrete surfaces, both vertical and horizontal, in layers up to 5 mm thick.
Features
- does not require priming
- it is a quick-drying vapor barrier, enabling the application of resin coatings on wet substrates after the minimum waiting time
- provides high chemical resistance
- very good adhesion to mineral substrates
- color similar to concrete
- very good thixotropy and workability
- non-toxic, odorless, solvent-free, non-flammable product
- possibility of application on "fresh concrete"
- high resistance to abrasion and wear
Application
- renovation and protection of concrete surfaces exposed to abrasion: wastewater treatment plants, industrial floors, etc.
- a protective layer of concrete against the aggressive effects of chemical environments
- leveling and smoothing the damp substrate before applying resin or cement coatings
- filling, slurrying and repairing the surface of mineral substrates, in layers with a thickness of 1 to 5 mm
Technical data
- A: B: C component ratio 0.75: 2.25: 17 kg
- maximum size of aggregate 0.5 mm
- fresh mortar density 1.95 g / cm 3
- set mortar density 1.85 g / cm 3
- application temperature> 8 ° C
- approximate shelf life of the product after mixing temperature 20 C 30-40 min
- setting time at 20 C 4-6 h
- maturing time for a single layer and before the application of the next one at 20 C 24 h
- full maturing time 20 C 7 days
- mechanical strength: bending 7 days - 4.5 MPa; 28 days - 8.5 MPa; compression 7 days - 22.5 MPa; 28 days - 30.5 MPa
- adhesion to concrete> 2.5 MPa
- very good chemical resistance to sewage, salts, oils, fats
- consumption about 1.95 kg / m 2 / mm
- layer thickness 5 mm
- 20 kg package
Techniniai duomenys - savybės
priedai