Drizoro - savaime išsilyginantis skiedinys, skirtas Maxepox Floor grindų sistemoms
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
12.64EUR už kg
reklaminė kaina
vieneto grynasis
11.63EUR už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
grynasis kainoraštis
316.06EUR
už 25.00 kg
visos kainos
reklaminis tinklas
290.83EUR
už 25.00 kg
kainoraščio kaina
bruto vienetas 15.55EUR
už kg
reklaminė kaina
bruto vienetas
14.31EUR
už kg
minimalus komercinis
produkto kiekis
25.00 kg
visos kainos
kainoraštis bruto
388.75EUR
už 25.00 kg
visos kainos
reklaminė bruto
357.72EUR
už 25.00 kg
Produkto aprašymas
Solvent-free, two-component epoxy binder recommended for floor systems with high mechanical and chemical properties for the protection and decorative finish of concrete and mortar.
Features
- due to its high abrasion resistance, it is suitable for heavy vehicular traffic
- very good resistance to chemicals: oils, greases, gasoline, acids and alkaline solutions, solvents, salts, etc.
- very good adhesion to concrete and mortar
- provides a continuous, uniform and consistent surface, with a non-slip finish
- easy to clean and maintain
- wide range of applications
- non-toxic, solvent-free and non-flammable
- quick maturation and putting into service
Application
- high abrasion resistance of the coating
- anti-skid multi-layer system with aggregate
- self-leveling system with high mechanical and chemical properties in garages, warehouses, sports halls, etc.
Technical data
- appearance and color of component A colored, homogeneous paste
- the appearance and color of component B is a clear, yellowish liquid
- Component ratio in A: B (weight) 4: 1
- component w proportions for A + B: C self-leveling mortar (to the weight) 1: 1 component w proportions for a dry mortar A + B: C (to the weight) 1: 3
- solids content component in A + B + C 100%
- component density in A + B 1.45 0.1 g / cm 3
- density for self-leveling mortar / dry mortar 1.90 / 2 0.1 g / cm 3
- flammability of the product non-flammable
- application and maturation temperature T / RH 8-30 C /> 85%
- shelf life at 10 C / 20 C / 30 C - 45/30/10 min
- drying time at 20 C 6–8 h
- time between the planes at 20 ° C 6-24 h
- maturing time at 20 ° C: 1 days for pedestrian traffic; for high beam 3 days; for heavy vehicle traffic 4 days
- bending strength for 28 days 32.6 MPa (according to EN 13892-2)
- compressive strength for 28 days 61.0 MPa (according to EN 13892-2)
- adhesion to concrete for 28 days> 3 MPa (according to EN 13892-2)
- consumption / thickness: applied as a clean surface - consumption for one coat / total application 0.25-0.3 / 0.5-0.6 kg / m 2 ; - thickness per coat / total application 170–200 / 340–400 kg / m 2 ; applied as an emitted multilayer system - total estimated consumption for resin A + B / aggregate C 1.0–1.2 / 1.0–1.5 kg / m 2 - recommended thickness 1–2 mm; applied as a self-leveling mortar - expected consumption 2.0 kg / m 2 mm of thickness - recommended thickness for a layer 1–2 mm; applied as a dry mortar: consumption 2.0 kg / m 2 mm of thickness - recommended thickness for a layer of 2-10 mm
- package 25 kg
Techniniai duomenys - savybės
priedai