Drizoro - skiedinys greitam grindų remontui esant žemai temperatūrai. Maxpatch MC
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
7.80EUR už kg
reklaminė kaina
vieneto grynasis
7.18EUR už kg
minimalus komercinis
produkto kiekis
16.85 kg
visos kainos
grynasis kainoraštis
131.38EUR
už 16.85 kg
visos kainos
reklaminis tinklas
121.00EUR
už 16.85 kg
kainoraščio kaina
bruto vienetas 9.59EUR
už kg
reklaminė kaina
bruto vienetas
8.83EUR
už kg
minimalus komercinis
produkto kiekis
16.85 kg
visos kainos
kainoraštis bruto
161.60EUR
už 16.85 kg
visos kainos
reklaminė bruto
148.83EUR
už 16.85 kg
Produkto aprašymas
A two-component mortar, where component A is a methacrylate resin, and component B is a mortar based on special cement and admixtures. When mixed with Drizoro Silica aggregates, it forms a quick-setting repair mortar which, even at low temperatures (down to -25 C), quickly obtains excellent mechanical strength and chemical resistance. This allows for quick restoration of usable performance of concrete foundations on which all kinds of road traffic takes place.
Features
- fast material, the repaired place can be put into use after 1 hour
- the applied layer may be 5 to 120 mm thick, depending on the aggregate used
- it quickly obtains excellent final mechanical strength and excellent wear and impact resistance
- shows excellent resistance to diluted acids and bases, fats, gasoline, aggressive substances, etc.
- suitable for use in a wide temperature range from -10 C to +40 C
- has good adhesion to concrete
- resistant to UV rays
- after it dries, it can be covered with a different coating
- it is easy to mold and apply
- it has good thermal resistance and can be used during cleaning works with steam or hot water
Application
- quick repairs of concrete substrates on highways, runways, bridge slabs, parking areas etc. at very low temperatures
- quick repairs of any concrete substrates used in conditions of high traffic and wheel load on industrial floors, in warehouses, loading areas, etc.
- repair of joint edges and substrates intended for leveling or lifting in the food, chemical and pharmaceutical industries, in cold work places, processing and processing areas, etc.
- quick anchoring and fastening of screws, bolts and other metal elements
Technical data
- appearance and color of component A transparent liquid
- the appearance and color of component B gray powder
- specific gravity of component A 0.95 0.10 g / cm 3
- specific gravity of component B 1.35 0.10 g / cm 3
- specific gravity of fresh mortar A + B 2.20 0.10 g / cm 3
- weight ratio of the mixture (A + B): Drizoro Silica 0308 (1.85 + 15): 5; (A + B): D. Silica 0308: D. Silica 3050 (1.85 + 15): 5: 5
- minimum / maximum application temperature of the substrate and the environment Maxpatch MC -10 / + 40
- workability time for the prepared mortar 10 -15 min
- time between the application of subsequent layers> 30 min
- maturing time before putting into service 1 h
- compressive strength: after 1 hour> 40 MPa; after 1 day> 60 MPa; after 28 days> 80 MPa
- flexural strength: after 1 hour> 12 MPa; after 1 day> 15 MPa; after 28 days> 20 MPa
- adhesion to concrete after 28 days> 3 MPa (failure in concrete)
- minimum / maximum thickness of one layer (mm): - mortar with Drizoro Silica 0308 5-15 mm; mortar with D. Silica 0308 and D. Silica 3050 15–120 mm
- consumption per 1 mm thick layer *: Maxpatch MC + Drizoro Silica 2.2 mm; Maxpatch MC + Drizoro Silica 0308 1.7 + 0.5mm; Maxpatch MC + D. Silica 0308 + D. Silica 3050 1.4 + 0.4 + 0.4 mm
- packaging set (A + B) 16.85 kg
* actual consumption depends on the porosity and texture of the substrate and the application method used
Techniniai duomenys - savybės
priedai