Drizoro - skiedinys, skirtas užpildyti siūles ir įtrūkimus Maxjoint Elastic
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
10.32EUR už kg
reklaminė kaina
vieneto grynasis
8.51EUR už kg
minimalus komercinis
produkto kiekis
10.00 kg
visos kainos
grynasis kainoraštis
103.23EUR
už 10.00 kg
visos kainos
reklaminis tinklas
85.15EUR
už 10.00 kg
kainoraščio kaina
bruto vienetas 12.70EUR
už kg
reklaminė kaina
bruto vienetas
10.47EUR
už kg
minimalus komercinis
produkto kiekis
10.00 kg
visos kainos
kainoraštis bruto
126.98EUR
už 10.00 kg
visos kainos
reklaminė bruto
104.73EUR
už 10.00 kg
Produkto aprašymas
A two-component mortar, where component A is a liquid based on special synthetic resins, and component B is delivered in the form of a powder, based on a mixture of cement, an addition of and specially selected aggregate. After mixing the two components, a resin-cement product with high adhesion is obtained, suitable for sealing and filling joints susceptible to movement and cracks in concrete.
Features
- allows to achieve a joint displacement capacity of up to 15%
- very high resistance and resistance to weather conditions
- does not require maintenance
- excellent adhesion to wet surfaces
- does not require a tack coat
- does not run off vertical surfaces
- suitable for permanent contact with drinking water, waterproof
- easy to apply and finish
- non-toxic, non-flammable and environmentally friendly product
- after setting, it can be painted in the desired color
Application
- repair of cracks prone to movement, cracks in concrete and masonry structures
- sealing of working cracks, cracks, expansion joints with deformability up to 15%; working cracks, cracks, gaps constantly immersed in water: pipelines, water tanks, tanks of sewage treatment plants, etc., gaps in prefabricated elements in concrete, ceramic on facades and structures
- as a mortar for pointing flexible surfaces
- as a flexible sealing, filling of expansion gaps in bridge structures
- as a flexible seal, filling gaps between curbs
Technical data
- appearance of component A milky white liquid
- component B appearance gray powder
- component A density 1.0 0.05 g / cm 3
- Density of component B 0.9 0.05 g / cm 3
- maximum size of the aggregate 0.4 mm
- Component ratio in A: B (by weight) 1: 1
- density of A + B fresh mix 1.26 0.05 g / cm 3
- the density of the mature A + B mixture 1.14 0.05 g / cm 3
- time to build in at 20 C about 30 min
- optimal application temperature 5–30 C
- A + B shelf life 30-60 min
- joint deformation 15%
- tensile strength 0.38 MPa (according to EN 28339)
- elongation at break 60% (according to EN 28339)
- deformation recovery 78% (according to EN 27389)
- package 10 kg
Techniniai duomenys - savybės
priedai