Koester - keturių komponentų akrilo gelis Injektionsgel S4
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
18.30EUR už kg
reklaminė kaina
vieneto grynasis
15.52EUR už kg
minimalus komercinis
produkto kiekis
39.40 kg
visos kainos
grynasis kainoraštis
721.07EUR
už 39.40 kg
visos kainos
reklaminis tinklas
611.48EUR
už 39.40 kg
kainoraščio kaina
bruto vienetas 22.51EUR
už kg
reklaminė kaina
bruto vienetas
19.09EUR
už kg
minimalus komercinis
produkto kiekis
39.40 kg
visos kainos
kainoraštis bruto
886.91EUR
už 39.40 kg
visos kainos
reklaminė bruto
752.13EUR
už 39.40 kg
Produkto aprašymas
Four-component acrylic gel with adjustable reaction time. It is used for sealing leaks in and for curtain injection with an adjustable reaction time from 15 seconds to 3 minutes. It is used to stop leakage in cracks, expansion joints and work breaks.
Properties
- designed to seal a leak in
- for sealing expansion joints, construction joints and for curtain injection
- adjustable reaction time by changing the amount of component B
- the product can be set for a response time of 10 seconds to 3 minutes
- by adding a dispersion of plastics to component B (Koester B +), an acrylic gel is obtained with increased adhesion to mineral substrates
- the addition of a dispersion based on plastics shortens the reaction time of the gel by half
- it is possible to dye the gel on site by adding pigment
- The injection gel is resistant to all chemicals normally present in groundwater (e.g. dilute salts)
Application
- thanks to the use of the addition of plastic dispersion, a significant improvement of the edge gel in the expansion joint can be achieved and the flexibility of the material increases
- the reaction time is reduced by about half in relation to standard mixtures, it can be adjusted by the addition of salt
- for injection of dilatation, it is recommended to use mixtures with longer reaction times
- mixtures with shorter reaction times (e.g. in gravel ground) may be used to limit the area of curtain injection in edge areas
- it is also possible to achieve lower penetration of medium sand by setting a shorter reaction time
- in other cases, it is recommended to use acrylic gel, which is characterized by a very low viscosity, high penetration and reaction time of about 4 minutes
Technical data
- solubility - miscible with water
- viscosity about 50 mPa s / + 20 ° C
- application temperature> +5 ° C
- adjustable response time from 10-15 s to 3 min
- consumption depending on application
- four-component set: A1 - 20 kg, A2 - 1 kg, B - 0.4 kg, B + - 18 kg
Techniniai duomenys - savybės
priedai