Koester - klijai ir skiedinys mineralinių plokščių Hydrosilikatkleber SK užpildymui
kaina pagal užklausimą
kainoraščio kaina
vieneto grynasis
4.77EUR už kg
reklaminė kaina
vieneto grynasis
3.96EUR už kg
minimalus komercinis
produkto kiekis
20.00 kg
visos kainos
grynasis kainoraštis
95.36EUR
už 20.00 kg
visos kainos
reklaminis tinklas
79.23EUR
už 20.00 kg
kainoraščio kaina
bruto vienetas 5.86EUR
už kg
reklaminė kaina
bruto vienetas
4.87EUR
už kg
minimalus komercinis
produkto kiekis
20.00 kg
visos kainos
kainoraštis bruto
117.29EUR
už 20.00 kg
visos kainos
reklaminė bruto
97.45EUR
už 20.00 kg
Produkto aprašymas
System adhesive and mortar for filling Koester Hydrosiilikatplatte mineral tiles. It is also used to fill defects in mineral tiles.
Properties
- System mortar for bonding Koester Hydrosilikatplatte boards to the substrate and for filling board joints
- for filling the cavity in plates
- putty or plaster for smoothing surfaces of previously glued boards
Application
- glue used with Koester Hydrosilikatplatte boards, glued to the surfaces of internal walls
- the boards absorb excess moisture from the air, store it, and then evenly release the moisture back into the room
- by insulating the surface of the walls, the risk of water condensation on the surface of the boards is reduced
- thanks to high porosity, the boards have a very large specific surface, which allows for quick evaporation of moisture
- as a result of combining the described factors, by using Koester Hydrosilikatplatte boards, a healthy and pleasant indoor microclimate can be obtained
Technical data
- material base cement
- White color
- a bulk density of about 1.4 g / cm
- specific gravity about 1.7 g / cm
- working time (+20 C) approx. 45 min
- compressive strength approx. 12 N / mm
- bending tensile strength (after 24 h) approx. 3.5 N / mm
- consumption: 3.0 kg / m 2 as an adhesive for boards; 1.7 kg / m 2 for a thickness of 1 mm
- packaging 20 kg bag
Techniniai duomenys - savybės
priedai